Jump to content

  2. → Viewing Profile: Posts: Lopius

Lopius

Member Since 30 Nov 2005
Offline Last Active Oct 28 2012 06:37 PM

Posts I've Made

In Topic: Bbb In A Nf

02 March 2006 - 06:18 PM

AHAHAHAHA I GOT IT TO WORK CONSISTANTLY

So basically I used a dremel to size down the BBB rod down. Ignore the little white thing, that was from my first catch that didn't work. For my new catch I ground the rod down so it looks like the NF rod.
Posted Image

Then I used a Bar B Q rod to add support. You can use anything as long as it fits inbetween the two remaining ridges.

Posted Image

In Topic: Bbb In A Nf

28 February 2006 - 09:07 PM

I got about 5 good shots off,before anything went wrong, with a homemade dart( a bit different that a stefan). All I can say is.... IT IS AWESOME. I shot about 65 feet and hit the wall at chest level from an even shot. I'm still perfecting the catch but my current idea seems to be working well but I am going to try and make it better. I'm so pumped for this gun to work 100%.... eventually.

In Topic: Bbb In A Nf

27 February 2006 - 04:46 PM

I'm using my highschool trained engineering "skillz" to re-craft my catch. I have tried a whole bunch of things. Hopefully my latest idea works. I should have planned that part in advance. Actually, I should have planned it out in the first place. Nerforbust, if you are refering to the plunger it just comes off but, if that's not what you're talking about I can't tell you how the rubber "thing" comes off. And for all that weakest link mumbo jumbo, the epoxy not sticking is the weakest link and there are no chains in my gun..........

In Topic: Bbb In A Nf

26 February 2006 - 08:05 PM

Yes it should be, but I messed up. Thats actually the part that keeps breaking. I had to make my own catch. But even plastic epoxy made to hold 3,500 psi broke. So I am going to have to design a new catch.

In Topic: Bbb In A Nf

26 February 2006 - 02:28 PM

I did glue it but I added tape just for a little extra. I didn't want to use epoxy to glue it together because the trigger mechanism I created breaks, I attempting to wokr out the bugs. So if I would have epoxyed it I would never have been able to fix it.

  1. NerfHaven
  2. → Viewing Profile: Posts: Lopius
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·