Jump to content


Justince

Member Since 10 Aug 2008
Offline Last Active Aug 12 2008 08:28 PM

Posts I've Made

In Topic: The Easiest Bbb Mod Ever.

11 August 2008 - 02:51 PM

I think the white disc is the air restrictor. The orange nub that sticks out of the barrel is attached to a longer plastic shaft. This is the air restrictor. The white disc is below is needed to prevent destroying your BBB. I had to put it back in. It helps to cut the white peg off, but you would have to take it apart. Simple, but I'd rather cut the orange barrel off and glue a coupler on. Then the air doesn't have to travel so far.

Alec



I don't think so but as long as you don't dry fire it, it shouldn't break on you. Like I said, if theres pressure than the piston head shouldn't break easily. Try not to throw parts of your gun out next time. You might need them.

Alec

I don't think so but as long as you don't dry fire it, it shouldn't break on you. Like I said, if theres pressure than the piston head shouldn't break easily. Try not to throw parts of your gun out next time. You might need them.

Alec


Haha, dryfire..reminds me of my sick paintball gun. But that's for a different time. Anyhow, ill make sure I take care of it and I think ill go to target and pick up a replacement just in case.

In Topic: The Easiest Bbb Mod Ever.

11 August 2008 - 01:55 PM

I think the white disc is the air restrictor. The orange nub that sticks out of the barrel is attached to a longer plastic shaft. This is the air restrictor. The white disc is below is needed to prevent destroying your BBB. I had to put it back in. It helps to cut the white peg off, but you would have to take it apart. Simple, but I'd rather cut the orange barrel off and glue a coupler on. Then the air doesn't have to travel so far.

Alec

Is there a way I can fix it without the part? Unfortunatly I threw the AR out. =\

In Topic: The Easiest Bbb Mod Ever.

11 August 2008 - 12:11 PM

Good first mod.

I always had my coupler fly off when I did this, so I just used super glue and plumber's goop, and e-tape over it.

The reason its rattling is probably because you took out the white disc. I kept mine in, it keeps it from destroying the plunger. You may read of a handyman spring replacement, I recommend not doing it. Destroyed my old BBB.

what white disk, can you send me a picture? "sigh"
Images will be posted soon as well.