Jump to content

  2. → Viewing Profile: Topics: fuzz080

fuzz080

Member Since 30 Jul 2008
Offline Last Active Jul 26 2011 06:45 PM

Topics I've Started

Make Your Own Springs!

02 December 2009 - 11:28 PM

I found this whilst serfing the net, thought it might be useful; http://www.instructa...ngs-in-seconds/

Rscb Help

18 June 2009 - 06:36 PM

Hey guys, so today I went down to my localhobby shop and got all of the materials required to make a RSCB clip. As I was building the clip I thought of something, I'm using CPVC for the barrel, and I'm using streamlines and a couple stefans. Both of those dart types are a relatively tight fit in CPVC. My question is, how will I be able to get the darts from the holder part to the barrel if the dart to barrel fit is too tight? Before you ask, I did search, and came up with nothing. Any help would be appreciated.

Dart Stretching

04 May 2009 - 09:17 PM

Hey guys, I have a question. What is dart stretching and how do you do it? Before you start yelling at me, I did search, and couldn't find anything on how to do it. Any help would be appreciated.

Maverick Troubles

21 April 2009 - 12:58 AM

Hey there guys, so recently I bought a maverick and did bags ar removal mod. After testing my gun out the turret isn't lineing up with the barrel at all, causeing the darts path to be blocked. The turret does rotate, it just doesn't allign properly. By the way I did search for this. Any help would be appreciated!

Ligntning Blitz Pump Help

25 March 2009 - 10:27 PM

Hey guys, I recently received a Lightning blitz, and when I opened it up, the top of the pump was broken clean off! I have been trying without success to glue it back together and make it airtight with no luck so far. I have hot glue and epoxy at my disposal. I've tried everything I have and it just won't work, so any help would be greatly appreciated!

  1. NerfHaven
  2. → Viewing Profile: Topics: fuzz080
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·