Jump to content


Member Since 29 Jul 2008
Offline Last Active Apr 14 2019 06:13 PM

Topics I've Started

I Need Help

16 May 2010 - 03:32 PM

HI, I am in need of some help at the moment with my Dart Tag Gun
Before evrything, I have searched, and have not seen a rearloading DTG yet, to compare to. This is why I'm asking.
I started a rearloading Dtg but when I close it up and pull the trigger the spring and everything works fine. Yet the dart does not move at all. I think it may be seal, but I have tried many different things and they haven't worked. It has the stock spring along with a crossfire spring too, so it should have enough air output to at least move the dart out of the barrel. I was also thinking about a mega missle integration if air output is the problem. The PVC sticks outside the turret back about 1/8 inch. You can't see any part of the inside of the piping, I couldn't think of any way to fix that either. Any help would be greatly appreciated and as soon as I have this thing working I'll do a writeup.

Posted Image

Posted Image

Posted Image

Posted Image

Hopefully these pictures work, and any help will be used.
Thanks already...

Red Recon

11 November 2009 - 09:36 AM

I was at walmart the other day and I saw a red recon, yes a red recon. It was the same price as a normal recon, just all red, attachments and all. There was also a sign for a red vulcan. Am I the only person who has see these. The vulcans were sold out, so I'm not sure if they were actually red.

Longshot Banana Clip

16 June 2009 - 02:03 PM

I remember seeing someone wanting to make a banana clip for the longshot. Well I was bored so I decided to make one. I couldn't get a picture because my dog decided that my longshot looked delicious. He ripped the banana clip apart, but here is what you need:

2 longshot clips
2 pieces of plexiglass,same width as clip
duct tape
sturdy styrafoam

Take the 2 clip and butt them up to each other, then place the plexiglass on it's side nextto the clip on each side. Bend the clip to desired bend place styrafoamin between clip to keep bend. Then wrap this set up in duct tape to hold it. Double sided credit goes to KingCosmo7's video he found .

No Shell Buzzbee Rapid Fire Rifle

28 November 2008 - 01:47 PM

This is my first write-up so please bear with me

I searched around this site and noticed that there were no mos mentioning no shells on the rfr. This mod is not compatible with the clip unless shell is removed

1 shell
electrical tape
o-ring that is same diameter as shell
super glue

Step. 1 take your rfr apart by removing the screws.

step. 2 clamp the shell in a vice or other device and cut about 3 millimeters off the bottom
step. 3 take the middle post/air restrictor out
step. 4 (optional) make the hole in the back of the 3mm high shell bigger
step. 5 take the large part of shell and o-ring gluing o-ring to cut part of shell and let dry
step. 6 once the shell is dry wrap the front of the shell, the bottleneck part in 1-2 layers of e-tape
step. 7 take shell and shove the e-taped end in the shell ejection
step. 8 put the gun back together
step. 9 (optional) take the 3mm piece of the shell once the dart is inserted in the back of shell and place it onto the o-ring. this piece adds about 5ft. of range

now your rfr is rear loaded, takes no shells and singled

you can pull the shell out of the shell ejection if you want to use the clip again

Questions? Comments. Flames.