Lion

Nice video, and pretty well fits this forum if you think of a nerf blaster when they name a firearm.



and pt2
http://www.youtube.com/watch?v=wqgSSAh8Cqs

I got this gun the other day and I've taken the stock and the front grip off but before I go and try prying it open, I was wondering if anyone has taken one apart and how they did it.

What was the big nerf gun box set that came out just before the nightfinder became a N-strike gun?
Idon't think it was the titan, but it all attached like the way the titan stuff all comes together.

Does anyone remember what I'm talking about, or am I just crazy?

This is my first write up and I'm typing it up and taking pictures with the finished gun,so bear with me please.

I'm not sure if this will work with the old zappers, i think their inner workings are diffrent then these new ones, but here is what i started with.

and this the the gutted gun who donated it's internals, i got it for $2 at walgreens.

Start by gutting the zapper and sanding down the inside the barrel, then try setting the internals in the gun to get an idea of where you need to place them,

cut the plunger rod off just a little past where it comes out, then drill a hole in it, so after you cut down the cord, you can tie it on.

You'll need to cut off the center screew post on the green outer shell to make room for everything to sit down in there, you'll have to sand down the side of the front green post too. When you know where the internals will be sitting, you need a front stop for the tube, i used the little orange peice from the front of the starting gun. You'll also need to build a back plate for the spring and a channel to house the spring catch(i just used plastic i riped off on the starting gun) and on the other side of the main body you will need to line up a peice of plastic to make sure the catch stays down, it should be just as tall as that half of the shell. Also when you are gutting the zapper, make sure to keep the part that goes behind the trigger, you'll keep that same sound when you pull the trigger and it will act as a spring

You need to sand down the sides of the tube and the top of the little wheel you'll use to redrict the cord to come out at the bottem(I distroyed my double shot some time ago and now it's sitting in peices, but i found the little wheels in that work perfectly)

last thing to do is building up the trigger, this was kind of an odd step where you need to figure out where you need to build upto so it will push on the spring catch.

Then all that's left is to put everything together.


I hope you enjoyed this and that it helps.

here are a few pictures of my longshot, it has a nerf "reactor" on it to give it that m203 look, it has a scope on it even tho i hate the idea of a scope on something that shoots 100ft, it is just for the cool look




just sold this, thanks FA24,



my disk shot and scout

here is a picture of ny NF and a dart tag gun


here is another picture of my nf with the alternate battery plate, i liker the guns in the game darkwatch that came out a few years ago



here is a nentendo zapper i did a mod on to fire darts


and here is a "nerf" energy sword i made out of foam



I just got this one done a few days ago( I still wanna add a scope to it and a laser sight)
i replaced the titan pump with a bycicle pump(also pictured are 2 nerf knifes i made, because zombies only know 2 phrases "brains" and the lesser known "got me with nerf knight I go away now")



All you have to do is unscrew the titan rocker launcher and throw this barrel in there and you can shoot darts or these big blast(i forget it's name) rockets



take that barrel out and screw on this "loser" barrel, that's right you just screw it on. I used plastic wrap over the threads then covered in epoxy putty then put a pvc Coupler over that then buld the rest onto that