xbox180

OK.

After reading the book "The ways toys work" it mentioned somthing about patents, and seaching them up on google, so I decided to try it.

Guide for SS2

Just enter a patent code found on your nerf blaster and find out every single internal picture.

Hope this helps.

Alright, Story Time

The other day I was looking through an old Boys Life magazine, then I saw it recommending a book called "The Way Toys Work". I ordered it as soon as I saw the word "Nerf" in the description box. Upon reviving the book, I love it . I mentions a little bit about modding, building your own Nerf gun out of PVC, and the internals of a triple strike and vortex tornado and how they work. Its a great book.

Linky

Ok so upon reviving an AT2K I cranked it open. During this mod you are able to do Tatum Bulls "Airflow mod" but this focus on getting the Cpvc barrels in and airtight

First get you supplies:

-Sharpie
-15/32 Brass 1 inch segments
Pipe Cutters
4 9 inch pieces of Cpvc
Epoxy
Hot glue
Plumbers goop
Dremel (Optional)
And of Course a Screw Driver

Supplies:

First start by taking your craking it open, there is a glued tab by the pump so take your saw or dremel and cut open the tab.



After taking apart your turret. Dip it into a pot of boiling hot water and then yank it out with pliers. Then I advise you do Tantum's Airflow mod as it will hep with ranges.

Linky

After doing Tantums, then take you brass like so:



And then Glue it in, epoxy, or whatever the heck you want to do to it in, but make sure that there is 1/2 inch of brass over the lip.

Then take you Cpvc and slide it ontop of the 15/32



Goop them ontop, it should create an airtight seal with minimum deadspaces.

Finish up your other barrels and screw your gun back together.

'

And your done, Ohh and I suggest gluing the trigger spring tank pin with hot glue as it helps with ranges aswell.

Ranges:With a 1 1/2 dart, 2 copperhead BB's 4 Plugged pumps
97
96
94
103
100
97
76 (Bad Dart)
99

Hope this make it into the directory!

Ok so recently having a Raider I have noticed that when I try using slam fire after 3 or 4 shots the prime bar get stuck or locked. I have yet to take out the AR but if I remove the AR or a certain lock will this work smother. I have searched around but yet after 2 years I still suck at it.

Ok, first write up, so please don't give me that much crap. I also ment to post this about a year ago but never got to it so here it is now.

You'll need to get your Materials which are

--A Screwdriver
--Hot Glue Gun
--Cpvc
--Goop
--Maverick
--Hacksaw
--Coupler

Start By opening up your shell



Next you want to cut down your Maverick shell like so.



Next hack it down so that way the two shells fit.



For the next bart you need to do this mod... http://nerfhaven.com...?showtopic=3666

Next you want to take your couplered Lbb and stick a peice of cpvc in it so its connected to the maverick air chamber measure and cut.



Now you baisically just glue and goop the crap out of it.



Now put everything back togther and and you should have a beast of a gun



Thant was my first write up, I hoped you liked it....

Xbox180