http://www.milaadesi...om/wizardy.html This is freaky. If you happen to figure out how they do it, don't post it here so others can freak themselves out
Are there any tubing connecters that can connect to tubing and be disconnected without losing any presure? Example: the tubing is connected to an air tank and one half of the connecter is on the tubing and the other half is on the pump. And they can be connected pumped up and then disconnected and there will be no presure loss. The tubing that i will be connecting it to is about five and a half millimeters from one outside edge to the other outside edge(in a straight line).