dvdmelancon25

So a powerstock would have a smaller diameter spring that goes past the stock attachment point and into the stock itself and ultimately push the plunger. I like the sound of that!

Not sure if the Omw kit would work, since the AT has a different catch plate. How much tho?

i am having a war in April that you can go to it is from 12:00pm cst to 2:00pm cst eye protection i required and make sure you read the posts by meow121325 here is the link http://nerfhaven.com...00-pm-to-200pm/ you can come if you don't mind travel

I would, but I'm saving up fro Endwar. You think there's any chance we could set up something around that weekend? Like Saturday evening or something, idk what the schedule looks like. 

I also have a chrono and a seriously modded blaster using a singled berserker tank and can confirm if you're using the right darts for your barrel you're probably hitting around 250. I was able to tune mine down to 180-200.

 

I am comfortable playing higher fps caps but a hard cap of 200 lets people compete more casually and draws bigger crowds, as mentioned. If it's just you and your friend, go nuts (but I recommend full face masks because split lips suck). You might also want cups.

How were you able to dial it down? Just fewer pumps or what?

No one here is going to judge you unless you start using shotgun primer to fire nerf darts.

Don't worry; air, spring and flywheel are more than good enough for me 

Is that the stock conveyor motor? If that's the case then it may be the amperage limiter is shutting off the flywheels, so there aren't enough amps to power the conveyor belt and the flywheels.