numa-t49

I am posting this for a friend on NRev.
Date: Saturday, July 2nd
Location: The location will be Peace Valley Park:
230 Creek Road, New Britain Township, PA 18901. Within the park, the war will be held at pavilion #1. Hopefully you will find it upon your arrival. Just get to creek road, and you will find the pavilion if you drive down it.
Time: 10am-5pm

Here are the rules:
1. Any garbage goes in the trash cans.
2. Basically just be respectful and don't act like an ass and you'll be fine.
3. There will be a break for lunch time- once everyone gets hungry.
4. As for gun bans, there are none. But I would like to ask if you have a gun that fires 100' flat or more, only use slugs.
5. Cover up all your brass barrels!
6. black and silver on your paint jobs are fine, so long as there's another color on your gun that is some non-realistic color (blue, orange, yellow, etc). The good thing though is this war location is quite isolated from roads, people, etc. so realistic blasters are not at the top of my concern list. Any blasters that I decide look too realistic, however, will be covered in orange e-tape.
7. gun hits count.
8. if you are too close to someone that you might hurt them with your blaster, yet too far to tap them, shout "surrender". If they don't, you have all the permission in the world to face-diddle them!
9. Eye Protection- I don't care how old you are- if you want to participate in this war, you have to wear eye protection.
10. Oh, and one more thing- NO F'ING CAMPERS DAMMIT! lol. but seriously, stop camping. it's no fun when people do that.

Game Types:
all kinds of deathmatch
zombies
VIP
CTF
all pistol-type-matches
Titan Football
Defend the core
"Sniperz" (single-shot primaries only; 1-hit-ko's)

What to bring:
[UPDATE] if you want to bring homemade foam "knives" for melee use, go for it. Also, feel free to bring any Nerf sword/axe products
$$ and extra blasters for trading purposes!
two or more primaries
roughly 200-300 stefans
springer pistol
WATER!!!
Packed lunch
Change of clothes
Eye Protection
A friend
A rain coat just in case of drizzles.....lol that sounded wrong....

Attendance List (13 attending so far):
Defenites:
me + 1
numa-t49 + 2
The
UrbanVenom +2
andtheherois +1
Ice

maybes:
Tigerman +1
LTJG Rob
evilbunnyo
RedShot

My friend A.C.E. on NRev asked me to post this here for his upcoming war in April. For the most part this is a direct copy and paste from his thread.



Date: April 2
Location: The location will be Peace Valley Park:
230 Creek Road, New Britain Township, PA 18901. Within the park, the war will be held at pavilion #1. Hopefully you will find it upon your arrival.
Pictures and video of the war area will be added closer to the war date!
Time: I find 10:00am is always a good starting time. At 10 sharp we will go over game types/rules. It ends at 5:00pm.

Here are the rules:
1. There's loads of parking space so make sure to park only in the designated areas- not on any fields!
2. Any garbage goes in the trash cans- there ARE trash cans at the park, so it shouldn't be a problem.
3. Basically just be respectful and don't act like an ass and you'll be fine.
4. There will be a break for lunch time- it will be around 12:00.
5. No camouflage at the war please. This isn't airsoft: everyone can still see you! haha, but seriously, no camo.
6. As for gun bans, there are none. But I would like to ask if you have a gun that fires 100' flat or more, only use slugs.
7. Cover up all your brass barrels!
8. black and silver on your paint jobs are fine, so long as the primary color on your gun is bright and non-realistic (blue, orange, yellow, etc). Any blasters that I decide look too realistic will be covered in orange e-tape.
9. gun hits count.
10. if you are too close to someone that you might hurt them with your blaster, yet too far to tap them, shout "surrender". If they don't, you have all the permission in the world to face-diddle them!
11. Eye Protection- I don't care how old you are- if you want to participate in this war, you have to wear eye protection.

Game Types:
2 team deathmatch
2 team deathmatch primaries only
2 team deathmatch pistols only
zombies
defend the core
defend the jungle-gym (for all the JSNO people who know what this is)
CTF
Squad death match (3-4 person teams)
gunslinger heaven

What to bring:
$$ and extra blasters for trading purposes!
two or more primaries
roughly 200-300 stefans
springer pistol
WATER!!!
Packed lunch
Change of clothes
Eye Protection
A friend


Attendance List:
Definites:
A.C.E. +2 or 3
Numa-t49
UrbanVenom


Maybes:
nlkm37
shandsgator8
The +3
faddle
Andtheherois +1

Ok so this is a write up on how to build a power stock for the Longstrike.
I’m doing this write up with the mod done and sorry no pictures while doing the mod, I again apologize.
So first thing you do is open up the gun remove the Ar’s, spring replacement, bla bla bla.
Next remove the plunger tube
Take a piece of 1/2in PVC and cut a wedge in it and glue it to the plunger tube.
Like this:

Cut the other end of the PVC so that it hits the back of the shell
Also cut the back of the shell so that when primes the new Addition will fully extend out of the gun.
It should look like this:


For the stock cut a piece of 1in PVC to your desired length, close the back of the PVC and add your additional springs. Glue it to the stock.

And now your done.
I am using 3 smaller sized springs in my stock and am getting 45-55 with the added stock and Ar removal.

Comments, Flames, Questions????

Ok so this project has been in the works for a while now. First of all Crossbowing a Longshot IS NOT MY ORIGIONAL IDEA. It was originally done by BalisticJoe. This mod will cover how to Crossbow your longshot, how to then inline said longshot, and then how to build one of the most comfortable stocks EVER.

So let’s get this thing started:

Open up your longshot and take out everything. The only parts you will need for this portion of the mod are as follows:

Now take the shell and Prepare to reinforce it.
You will be reinforcing this:

This part of the mod is important because it increases the life of your longshot.
I used knex and hot glue to reinforce, but you can use any thing that you want.
Next you are going to close up your gun then trace an out line of ½ in. cpvc on the back and cut it out like so:

Now set your shell off to the side.
Take out your bolt. Remove the back screws, take out the spring. Cut the bolt and remove like so:

Now take some ½ in. cpvc and single your long shot with it like so:

The cpvc runs through the back of the piece and is hot glued in place.
Now superglue it to the back of the plunger chamber.

Next glue on a ½ in. cpvc coupler.

Now cut yet another piece if ½ in cpvc and insert half or it into your desired length of ½ PVC. (This will be for the inline clip, what ever length you choose is the length of your clip.)
Glue it all together and you should have this:

Next take a small length of PETG and E-tape both ends so that the one fits snugly in the PVC and the other in a ½ in. cpvc coupler.

Glue it all together and you will have this:

Congrats you just inlined your Longshot.
Now take your plunger out. Now cut a small length of ¼ in. copper tubing. Super glue it into your Plunger rod.

Then put ½ in. cpvc over the copper that is hanging over. Superglue it in place.

Next add what ever springs which you desire, strengthen the catch spring and put the gun back together.
Now take a ½ in cpvc t-coupler and drill a hole through the coupler.

Once the hole is drilled insert the cpvc from the back of the gun and then screw it all together.

Start off with your Berserker



Remove the turret by unscrewing the 5 screws.



Now its time to remove the Ars. I used a hammer and a sccrew driver.



Now you are going to want to remove the bottom of the turret. With a cutting tool cut away less than 1/2 an inch from the bottom.



Now you are going to cut along the bottom of the lip at the top of the turret.



When cut, it should look like this:



Now using a cutting tool cut the top of the turret at each "v"



And when finished it will look like this:



Now make 20, 2.5 inch cpvc barrels.

Place the bottom of the turet back in the gun and screw the top back in.



Now begin to install the barrles. The cpvc should fit perfectly inside the bottom of the turret. I used hotglue and only in the top bart of the turret.



When intalled it will look like this:



Now on to the BBBB part of the gun.

Begin by opening up te gun and cutting the black tube about .25 of an inch after it is in the turret.

Next take a length if 3/8 brass that is 2 inches longer than the current black tube. Put e-tape on one of the ends and 2 inches fron the other end.



Now cut a 2in lentgh of cpvc and put it on the brass up to te e-tape.



Now put it in te black barrel and test it. You may need to add a spacer between the black barrel and the cpvc.

Once you are happy superglue the brass into the black barrel.



Now put the gun back together.

It should look like this:



Now add a coupler and a speed loader and you are done.