Jump to content

  2. → Viewing Profile: Topics: SeniorXJ

SeniorXJ

Member Since 03 Jan 2018
Offline Last Active Oct 27 2019 09:49 PM

Topics I've Started

Upgrading Spring/Brass Barrel

22 October 2019 - 03:43 PM

I'm modding an old Nightfinder and I have removed the AR, brassed it with 7/32 and increased the seal on the plunger. When I went to put in a bigger spring it actually shot worse and had less power. I know the barrel length can have something to do with it but I can't figure it out.

What I do know is that it's not air tight and I believe the tube flexes under the pressure as there's no other way air can get out. At the moment I have the stock spring thats stretched out and a 2nd weaker spring. I'm using mostly worker stephans and in it's current form, it will fire through a scar barrel. With the [k26] all darts would get stuck.

Any help would be appreciated!

Anodizing 130 Motors

22 October 2019 - 03:24 PM

Can anyone recommend a way to anodize a set of 130 motors without destroying them?

If not then a recommendation for a paint that will adhere and withstand the high temps?

Thanks

Screw Mounts Broken

23 July 2019 - 05:04 AM

A while ago I used blue thread locker on all the interior screws in my stryfe. The next time I worked on it the thread locker destroyed the plastic mounts. Two mounts were on the cage and now it's a bear to get it aligned. Is there anything I can do to fix this?

Thanks

Worker ndfeb Motors

20 April 2019 - 04:48 AM

Has anyone used the new worker ndfeb motors? I'd like to get some feedback before buying them, but I can't find anyone who has run them.

Thanks

Why a 2s 7.4v Lipo Charges to 8.4v?

29 September 2018 - 06:00 AM

I have a 2s 1000mAh graphene lipo and a hobby grade charger. It always charges to 8.4v and I've always wondered why?
My 3s 11.1v Tato lipo also charges to 12.4v. Anyone know why this is?

Thanks

  1. NerfHaven
  2. → Viewing Profile: Topics: SeniorXJ
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·