Tail-Break

Hey Guys,

So finally getting all the parts i wanted for my own Retaliator along with the Yokiko "Worker" Clear pump action kit (Forgive my spelling) and installing everything and calling it a day. but recently i like many others have likely suffer a piece of the internal shell that holds the rubber padding as snapped so i thought ok bit of superglue should be ideal.. but sadly it was only temporary. so the parts i have are:

1. Artifact Metal Bolt-Sled in Blue  

2. OMWs Breech tube.

3. OMWs Stage 1 kit being the 5kg Spring, Catch plate and the back plate 

so i've decided, in the future to buy another one.. not my ideal choice but a learn from my errors choice. So like before i come seeking advice and ideas i could add to learn from this.

Kind Regards.

Hey Guys,

I recently bought a nerf Retaliator (Sonic ice) and i begin looking into what Mods i can do for this Blaster and to no real surprise i find a fair few kits, so i thought i'd ask you kind folks for ideas and opinions of mods kits you've used.

Artifact Aluminum BlotSled (Blue)

Worker Mod Pump Kit combo six items for the Retaliator (Clear)

Artifact Aluminum Plunger Rod (Blue)

OMW Stage 1 Kit (5kg Spring)

Workers Final Stage kit

so there the kits i've found at the moment seen a couple of videos on some of them, so ideally the question is: What's more ideal and Practical in terms of the long run? cause at the moment, it's gonna have the 5kg spring and still deciding what more to do to it but i thought wouldn't hurt to ask your guys.

Hey Nerfhaven

So i recently bought a Barrel Strike and like all i decide to beef up the spring but with mine i'm having AR issues where i'll fire one then another dart will attempt to leave the barrel without me priming it. the spring is a 5 kg from OMWs as i saw in some videos, cause before i modded it it worked fine.. and now it's "iffy" at best. so i seek any advice or to hear: "Revert it back to stock...?" 

Kind Regards.

Hey Guys.

Just recently bought myself a Firestrike for my "mini" Secondary/Flashlight because i think it's a good idea to have a 2 in 1 so like anyone. i come to seek your advice/suggestions for parts. Ideally being a suitable spring for HvZ, i knew Orange Mod Works did a full kit but sadly Discontinued way before i joined this community. so if anyone has great ideas i may use or base off.

Hey NerfHaven

I've recently begun planning and researching; to mod my Demolisher and so far i've done some very basic mods. such as the E-Tape air seal mod and removed the "Grill" tip from the tube and sanded about 4/5mm of the bottom of the trigger (A simple mod i learned from FDS) for a better feed of the dart. At the moment that's what i've done and still got more planning to do. 

my list for these mods are: 

New Motors (130 Honey Badgers)

Extended mag release.

new FWC and Flywheels 

Rewire and microswitch (18 AWG For a 2s Zippy 850 Compact) 

Voltmeter.

Removal of any unnecessary locks.

And any mods you guys suggested in the replies 

So there my current list of mods, given the limited amount of space. so if anyone with more knowledge or advice as i am new to this then i'll be grateful or if you have any mods you recommend.

Kind Regards.