Find contentI've had my "sawed off" LBB for a while now. It basically has the plastic surrounding the barrel sawed off to allow faster and easier dart loading into the stock barrel. Here's a picture of what it looked like:
Not particularly satisfied with the looks, I got a red dot sight and a $0.99 toy M-16/M-4, hoping to make my LBB look like some kind of SWAT weapon. I then spent several hours (watching Adult Swim on CN at the same time
) cutting and shaving away at the M-16/M-4, eventually getting the part to fit around the LBB's barrel. Being a tad loose, I jammed three stock darts (suction cups removed) inside to provide a better hold. Then I started cutting a rectangular section off the top of the LBB, just enough so that I can fit the base of the red dot sight between the two halves of the gun. The sight is aimed slightly downward for two reasons: to compensate for ranged shots, and because the top of the LBB is shaped that way 
. The end result:
I might eventually take up Arcanis' advice to mod the barrel, but since I don't have access to a dremel, hot glue guns, etc. (all of my mods usually involve only a multitool and a sanding block... sometimes a saw), I'll wait on that. The stefans that I use (made by someone at my church - cerealkiller here at NH) fit just fine - with a ramrod, anyway. Pretty satisfied, overall.
Any additional mod advice, anyone?
