SheriffWingz

Nerf XBZ Raider that i modded after TheManta's raider mod. I noticed i had the same parts lying around and figured id build one because his looked really cool. Could not have done this mod without his help, so big thanks to TheManta for helping me with it! 

 20170816_191922.jpg   201.02KB   98 downloads

oh i am currently doing that mod with a hornet pump. i had help from a very nice member of this community named TheManta, and what he did was he put the tube from the replacement pump into a hole drilled into the original plunger tube, then secured the original plunger head housing the overpressure valve in with a screw, i did the same with my blastzooka and it works great. dont forget to plug the plunger head of the replacement pump though so that is only runs on the stock opv. and about the hot glue, i tried that and im not sure if it makes a difference or not.

 20170307_205529.jpg   145.96KB   118 downloads

Modded Nerf Retaliator with a OMW stage 2 kit installed. It was painted with a fishnet camo design using an airbrush and tamiya paints (flat earth, german grey, dark green) and i used various stencils for the fonts on the sides and the "Dont tread on me" snake on the left side of the blaster.I also weathered it to make it look chipped and rusted. I put the required orange tip because it looked waaaaay too much like a firearm even with the orange mag releases. definetly still going to keep it away from outdoor wars with my friends because of how much it looks like a firearm even with the orange tip. Hope you guys like it! 

 20170307_205537.jpg   157.57KB   114 downloads

pic of the right side

~just noticed after posting, that the pictures are very dark it is actually a much brighter colored camo but i took these pictures at night in my room with low lighting. you have to kinda zoom in to see the stenciled stuff and rust weathering. sry bout dat

Mods Done:

• OMW stage 2 kit installed
• GavinFuzzyCustoms Retaliator Pump Grip 
• OMW 5 kg spring upgrade
• metal reinforcement plate in the back of the blaster 
• re lubrication with white lithium grease

Final Ranges: 70-95 ft (Angled) 70-80 ft (PTG) with FVJ darts

 20170307_205559.jpg   149.41KB   104 downloads

A Nerf Sledgefire that has been modded to fire a single dart at a time (or two if i load 2 in), and it has been swirl painted with a green/black/white enamel swirl with gray detailing. 

 20170307_205608.jpg   88.05KB   93 downloads

A pic with the breech open, I wasnt too happy with how the silicone triangle turned out but it works and seals on the pvc barrel nicely. The 9/16 brass inside the pvc has tightening rings around it so it will hold the dart snug without it falling out the barrel. This blaster can fire elites and stefans alike. Hope you all enjoy this mod as much as i did! 

Mods Done:

• Air restrictor removal
• Singled down brass barrel nested within 1/2" PVC
• Home Depot Evrbuilt spring instead of stock spring
• shortened shell release and relocated shell release spring
• stock removed (not sure if that counts as a mod but whatever)
• locks removed
• plunger padding with packing foam
• re lubrication with white lithium grease

Final Ranges: 80-95 ft (Angled) 70-80 ft (PTG) with FVJ Darts

 20170307_202526.jpg   112.79KB   111 downloads

Modded Nerf Lock n Load with a 4 inch brass breech inside 1/2 inch PVC using popatachi's lock n load mod guide, (instead of 17/32 brass inside 9/16 i used 9/16 brass inside 19/32) and it fires hot glue dome stefans. Really happy on how clean it turned out. I did not want to paint it because i dont like painting vintage blasters. I have been waiting such a while to do a mod on a vintage blaster, and when i did have enough money to purchase a 1995 kenner crossbow on ebay, i didnt want to put in all my money on one blaster. I really enjoyed this mod and i plan to use it against my friends in our outdoor nerf wars (I really wish i could join a real nerf war, im new to nerfhaven but ive been modding for a couple years and really enjoy the hobby). hope you all like it! 

 20170307_202536.jpg   74.55KB   113 downloads

another pic with the breech open

Mods Done: 

• Air restrictor removal
• 4 inch brass breech 
• added a retaliator spring with the stock spring
• tightened the "o ring" (more of a rubber skirt than an o ring)
• re lubricated everything with white lithium grease
• Keyring added to plunger rod

Final Ranges: est. 70-80 ft (angled) 65-75 ft (PTG) with hot glue dome stefans.