Jump to content
13 July 2017 - 12:13 PM
I would recommend going into a hardware store with the plunger head and looking for one that fits on the plunger head and is smaller than the o ring.
10 June 2017 - 06:53 PM
Try looking in ace hardware or similar stores. Thats where I usually get mine.
07 June 2017 - 09:32 PM
I generally do swirl dips and for that use I would recommend Testors oil-based enamel paints, they apply well and don't chip easily.
04 June 2017 - 11:48 AM
Hit them as many times as you can.
02 June 2017 - 09:21 PM
I think Open Flywheel Project has one which you could get printed from shapeways
Community Forum Software by IP.Board