This is my first write-up, so be nicer than you are to other people
I'm at school so I can't do pics, but i'll add them as soon as i get home.
you will need:
1. tp tubes
2. cpvc (1/2")
3. hot glue
4. 1 1/4" pvc
5. packing tape
insert 5 lengths of 1/2" cpvc into the tp tube and hot glue the spaces shut
cover the tp tube with packing tape and insert it over the 1 1/4" pvc
put the pvc end onto a 1 1/4 inch coupler and you're done
Another site has a write up of how to build a pump for homemades, check it out: SSC's pump no more bothersome integrations of bike pump to pvc. not to mention the fact that it works just like a stock nerf gun pump
ok, so my dad doesn't want me using stephans because they have no cushions at the tip. I was thinking of making a regular 2 inch stephan with a 1/2 inch diameter but putting about a 1/4 inch long tip of the same material I used for the body of the stephan. would this work or would it be wobbly because of the relatively light tip? (keep in mind that the foam tip is only 1/4 inch long)
Find content
