Thatone

Your dart fit's too tight I would swap it out for 17/32 brass one or a 1/2 petg barrel.

Have you asked to see if this is ok? As I've been to wars were we have been asked to move, and at 2pm dusk is at 4 to 5-ish. Also I would post war threads a week or two in advance. Also Titans and Hydrocannons should be banned as they shoot 300+ fps and can break skin at close range, and have you hosted wars before?

I also may be going.

Do you have a orange one? I hear they are hit and miss, your breach could have a slightly wider breach area if you push out the metal pin (its where the breach and sled meet) and put a breach from another blaster or a drop in kit that should fix it.

Nerf darts are pressure fit into the breach area so taking out the AR won't change chambering darts or firing but the AR stops the blaster from dry-firing (dry firing to much will break the blaster).

The AR might be pushing out your darts if there worn-out, but sounds like your dart tooth my not be pushing the darts fully in to the chamber. I would try to put a different spring there (like a retaliator one) and that could also fix your problem.

I hope this helps! -Thatone 

I found you can add a nerf maverick spring under the old one if you want more power, and I would re-grease it as well.