Jump to content

  2. → Viewing Profile: Posts: nutterbutter

nutterbutter

Member Since 21 Jan 2008
Offline Last Active Nov 13 2013 03:58 AM

Posts I've Made

In Topic: Dollarama AIR BLASTER

14 March 2013 - 12:47 AM

I'm not quite sure of how moving the PT forward would change anything, perhaps an example could help. I thought about a plunger swap, but i don't have any bigger on hand and as stated, this was a quick an easy to do mod. I don't wan't to get too much work on a gun that will most probably break down after 500 shots if you know what I mean...

Moving a plunger tube forward (In relation to where it sits stock) can increase the volume of air that would be in front of the plunger head while the gun is cocked. The plunger rod/head is then allowed more of a draw, and thus more power. It can be done on a NF, though it rarely is. I can snag some pictures of mine if you'd really like to see it.

In Topic: Dollarama AIR BLASTER

14 March 2013 - 12:09 AM

Looks like this gun has a LOT of extra room for a PT swap, with some work of course. Even still, looks like you COULD move the PT forward for a decent gain in draw. Either way, it's always neat to see someone make something out of nothing. Good first post.

In Topic: Coop's Stryfe Modification Write-Up

07 March 2013 - 02:05 PM

This thing is cool as shit. I'm not an indoor player, but I would imagine this would hold its own very well. Any intention of eventually putting some different motors in? Also, is the Strongarm/barrel attachment removable? And a final question, how many hours do you think are into this? Including paint and what have you.

In Topic: Singled Nerf Rough Cut

03 February 2013 - 03:24 AM

I'd guess this was a "rather then toss this because I fucked up the stock barrel assembly, I'll single it" mod. We've all done it, at least once. Just so happens, this guy did a write up about it. That's all.

In Topic: Air displacement of Night Finder Plunger

03 February 2012 - 12:03 AM

By removing some internal parts of the shell, you can increase the draw by sliding the plunger tube forward to the back of the part of the shell that wraps the barrel. It won't be enough for what you're looking for, but I felt it was worth mentioning.

  1. NerfHaven
  2. → Viewing Profile: Posts: nutterbutter
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·