Shin Ryoku

 Hello! I do not know if I am putting this in the right place but, I am working on painting a nerf blaster. Just put a black base coat on it and I plan to use a paint brush to add details but, instead of using paint such as citadel paint do you guys think nail polish would work? And the black base coat is a Duplicolor black vinyl and fabric dye

Hello! I am thinking of buying a big blast but is it better than the blastzooka? Can you guys tell me which one is better.

*Extra* I am gonna rebarel the one I buy. Don't no if this will change anything*

Thanks!

Hello! I am posting again about longshot questions. I didn't want to post on my old post because I would  be asking a lot more questions so I thought I might just start a new one. Anyway, I have recently destroyed a apollo and took the internals that interested me. As I am still new to modding, here are my questions:

1) Can I put a apollo spring in a longshot? If so, should I replace the spring,spring addition or something else? The spring is 3 1/2 inches long.

2) I took the small springs out of the apollo, would any of those springs work for a upgraded catch spring for a 8 kg spring? I did mix up the springs though  .

3) I broke a pen with a small spring in it which is two centimeters long and definitely stronger, will it work for a upgraded catch spring for a 8 kg spring?

Thanks, if I have more questions I will comment on this post.

Just incase you want to see my last post about this question http://nerfhaven.com...-mod-questions/

And finally this is a ZED longshot, but from what I heard, it changes nothing-just a reshell.

Hi there guys, I am still kind of new to nerf modding so I was wondering if you could help me out. I am planning on modding a longshot soon. The mod I will be doing is replacing the spring with a OMW 8 kg spring- I have done some spring mods but only on like a hammer shot and a jolt which is I imagine easier then modding a longshot . So now here are my questions.

1) If I add the 8 kg spring will I need to do anything like add a better catch spring?

2) If I add the 8 kg spring will I have to modify the stock using a "stock block" and if so what kind of cpvc or pvc should I use?

          Thank you.

I have a modified Nerf Demolisher which works well with standard AAs or 2-3 Ultra Fire 14500 3.6V 900mAh batteries used with spacers.

I am concerned about the safety of the Ultra Fire 14500 3.6V 900mAh batteries since they seem to lack a protection PCB.

Is there a suitable replacement that will give me the same shooting distance as 3 Ultra Fires + spacer but with a safer design?  If so, a purchase link to a reliable store would be appreciated.