Find contentThis is just a dart made out of scraps thats really only good for shooting at your buddys at home. Yes, I know stefans and stock darts can out perform this, but just a good use for scraps.
I got this idea from Star Wars Attack of the Clones, It was the dart that Jango Fett used to kill Zam Weasle after she was about to reveal information. It was called the Kamino Saberdart heres a picture of it from a Star Wars book. (It really has 3 prongs instead of the 2 you can see there.)
Heres how to make it. (Note: This is only for guns like the nite strike. turrets and clip guns dont work.)
What you need
- Hot glue gun
- Post from air restricters
- Any type of stock dart
- An orange AR
- Some scissors
First take a stock dart, (doesn't matter what type) and pull the head off it.
Then on the back of the head you want to cut off the tube thing.
After that stuff the tube down the middle of the AR where the 3 prongs are. (Make sure the hole is sticking up.)
Then ram the post into the hole on the tube.
Make sure you keep pushing all the way, so the post goes through the tube and through the hole in the AR.
Next cut off the end of the post sticking out the back of the AR with scissors.
Now in the middle of the three prongs were the post and the tube is, put a dot of hot glue. Not a lot, but enough so that the post can't be pushed out without some work.
This is what the final product should look like.
Out of 10 shots, the stock dart tag dart go about 63 feet to the Saberdarts 57.
Edit:This may be a little painful on bare skin so just add a dome of hot glue over the prongs. Of course this is not suitable for a Nerf war, because they are not legal.
Try it!
