pusur44017

I have a Deploy with an 18 clip magazine with elite darts in them.
The deploy has a shotgun like action where a piece of the barrel is dragged back, then forward to pick up a dart.
This action is a right nightmare because of the pressure of the 18 clip dart causes the dart to be so close together that the rubber tips on the elite darts friction together and causes the dart in the chamber to bend and not fit in the chamber correctly, thus not firing it.
Sometimes the load/reload action will be alright, but then it will still be stuck because of the friction to the barrel/barrel tooth and then it won't fire, you pull back and forward again and it's really done for.
I need some help with this. The obvious thing to do would be to mod the darts, someone suggested duct taping them (maybe use masking tape though) and I might try that, but I'd
like to know if there are any other not so difficult and comprehensive modifications that I can try. Doesn't have to be entirely related to the problems I've described as this gun has all sorts of problems.

-pusur