ccssneo

ompa, on May 27 2008, 09:52 PM, said:

It will be the usual mod; remove the turret housing, make sure you can cut straight, and then put a bunch of cpvc stubs onto the turret base. Use hot glue/epoxy putty/plumber's goop/epoxy (whatever glue you want to use) to mount the barrels. The length of the cpvc should depend on the darts you will be firing out of it; shorter the tighter the darts are, longer the looser they are. Saw off the barrel stubs on the turret base as you see fit.

Otherwise, I believe it might be easier to use brass; Generally with a little sanding you can just jam the barrels in with some hot glue into the stubs, and then sand the inside of the turret housing and slide it right over the brass. You end up with a lot more support that way.

The thread I'm assuming you referred to uses 3" barrels.

~ompa

okay sounds good. Also what size brass should i try?

Ok i would gladly like to split the shipping to get some petg .
Now i have a source to my mods thx min.tee

Do u have any darts or stephans or FBR i can buy aswell?

Yeah well you see i dont know many fish stores in My area so getting petg (which i believe is best?) maybe quite hard. Because i hav to go to Vancity and get a prepaid visa card and use it online to play OMC also it may take some time because there located in america. Does Homedepot or Rone give custom cut pvc or will i have a huge tube on my dads car?

I live in surrey , Bc , Canada and i was on Homedepot.ca and they only have tago ones. Anyone know any other stores or how i can get a hold of any?. Same with brass , petg , or pvc i cant seem to find any. If u live in surrey bc id gladly buy some items or equips aswell

Hi, i wanted to make this mod but unfortchunatly (sorry bout my spelling) there are some question i want to ask. Is it easier to load?
What and how do i cut the green part were the yellow thing sticks out.