Jump to content

  2. → Viewing Profile: Posts: Keeper0fwar

Keeper0fwar

Member Since 19 Dec 2014
Offline Last Active Aug 04 2015 09:24 AM

Posts I've Made

In Topic: Strongarm help

20 May 2015 - 07:43 PM

Issue is, brother has my camera at his house. Will attempt to get pics if possible.

The main issue (I believe) is that when I fire, the priming rod doesn't go all the way back, meaning the small wings on the priming rod don't collide with the triangles on the priming handle, causing it to miss, and not be able to pull back.

In Topic: Modification and Paintjob Pictures

26 April 2015 - 04:41 PM

Very basic old-school mod, but still a pretty effective one.



Posted Image



The base coat is a black Rust-Oleum enamel. the purple on the blaster is a Citadel Liche Purple, and the dry brushing is a Citadel Adeptus Battlegrey.

Pretty simple mods, spring upgrade, and AR removal. Hitting about fifty feet flat.

In Topic: Stryfe help.

09 April 2015 - 01:13 PM

Thank you SO much for your help. Black dye will actually probably work better than white, now that I think about it. Also, those Stryfes are amazing, really liking that "Medic" one.

In Topic: Stryfe help.

09 April 2015 - 12:51 PM

Here's what I did for the outside.

  • Pull all of the internals out.
  • Desolder the leads that connect to the battery compartment.
  • Put masking tape on the pieces that touch the positive battery terminals and around the springs that touch the negative battery terminals.
Why do you want to paint the insides?


Overall better look, but, the main thing I was concerned about was water getting into the internals while I was dipping it in. (See video link.)

Of course, i'm not talking about painting the internals, just the inside of the Stryfe's shell.

  1. NerfHaven
  2. → Viewing Profile: Posts: Keeper0fwar
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·