Xenon

why not get 4 and make a Doominator useful. You'll have to find a way to quickly attach/detach the tank from the barrel system and pump. Also you should probably take this down before you get warned. The Admins don't like concept threads. 

There are 4 of us going. I'm bringing a modified stryfe but the rest of my friends are just coming and will probably play with the blasters that dart zone has. Homemades will probably be OP in an indoor arena, unless you're bringing loaners to even the playing field. I think Filming will be totally fine.  

I am not sure but that mod is quite old. I want an 8 shot cylinder personally, because i was cooking an idea to combine the best of both pistols into one. and i've been tinkering with both broken strongarm and hammershot internals to see if i could make them work together, and when i heard about this cylinder i got very excited, but alas   . 

Well maybe they should so i'd feel the need to buy one. 

Damn... I wish I had seen this sooner. I would have sent you the bipod legs just for shipping and would have even painted them up for probably what you spent on them from that ebay link. Sorry i didn't see it in time. I've got dozens of those LS legs laying around. Anyways, if down the road you do decide to do the integration, yes it will mess with the cosmetics of the pj, but depending on how into it you want to get it wouldn't be all that difficult to fix in the end. If you didn't want to touch the paint on the Longshot itself then I would recommend painting the CycloneShock first, then mating it to the Longshot.

Again, I apologize for not seeing this sooner, and if you have any questions about paint please feel free to pm me at anytime. I have years of experience in modding and especially in paint work, from minis to models to mods.

A quick word of advice on getting the paint to adhere to those bipod legs if you do paint them; they are made of the softer plastic, not the hard easy to prime stuff of shells. Vinyl dye WILL NOT bond to it without a very good sanding and wash in an acetone or some other type of chemical thinner. Rub it down first, then sand it progressively down with a quick like 120 grit, then 240, and finish with like a 320 or so.

If you dont do this the paint will just chip up and make for one sad panda.

It is ok Brimstone, the legs i bought on Ebay came with all the required screws and hardware so i'm satisfied with my purchase. Also thank you very much for the painting advice, i probably would not have realized that until i halfway through detailing. I also have a good idea of painting a LS Scope to match to gain maximum LongShot  camouflage-ability . As for the Cycloneshock integration, I think that i'll leave the original Blaster shell as is ( minus the Bipod legs) , and maybe it'll be a cooler idea to integrate that gigantic pistol into the LS front gun/ stock extension, and then paint that all to match too. It'll be detachable so the blaster will be only uber front heavy when it has to be, and it'll be super awesome.