Jump to content

  2. → Viewing Profile: Topics: CS- Tiff

CS- Tiff

Member Since 24 Sep 2014
Offline Last Active Sep 05 2015 02:23 PM

Topics I've Started

Info on these ranson motors?

11 January 2015 - 08:15 AM

http://www.dhgate.co...lceorder-1-null

Does anyone know if these are good or bad? From the stats, they seem to be better than almost all the 180's out there because you can achieve 68000 rpm at 12v. I want to set a record for the fastest rapidstrike out there and Im wondering if I should make this my pusher mech.

180 Setup Question

08 January 2015 - 06:01 PM

I am preparing to do a 180'd rapidstrike with the circuits separated. I was initially planning on running it on 4 trustfires for the flywheels and a 9v for the pusher but then I found out that trustfires are just plain stupid. Now I am thinking of 2 efest 14500 cells in series for the flywheels and 2 trustfires for the pusher (I don't think the pusher battery has to be as good). Will this setup be better that the initial setup that I was going to use? The pusher motor is still stock.

Aluminum tubing

04 January 2015 - 08:06 PM

I noticed that home depot seems to carry aluminum tubing but not brass tubing and it is REALLY cheap. I watched Rob from SBNC's easy rebarreling guide and realized that home depot carries 1/2 inch but not 13mm. Does anyone know if this will work well too?

Usable Dimensions for Rapidstrike tray

02 January 2015 - 09:55 AM

Does anybody know how small my lipo has to be to fit in the stock battery compartment? I can always remove the back and keep the end cap to add space.

Trustfire IMR Batteries?!?!

30 December 2014 - 04:55 PM

After browsing ebay for some 14500 IMRs, I found these trustfire IMRs. Does anyone know if these will provide enough current for 180's like lipos do? http://www.ebay.ca/i...=item23475411d4

  1. NerfHaven
  2. → Viewing Profile: Topics: CS- Tiff
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·