Jump to content


Member Since 29 Dec 2007
Offline Last Active Jun 03 2013 08:39 PM

Posts I've Made

In Topic: Daft 09

10 February 2009 - 11:34 PM

Alright, I have one suggestion/modification to the singled titan rule: for every dart you shoot at someone with a singled titan, even if it doesn't hit them, you must punch yourself in the junk.

Also, are we using stefans or no bc I don't have anymore, they are either crushed, broken or lost.

In Topic: Daft 09

28 January 2009 - 11:54 PM

I'm totally in!!!

In Topic: Net Gun

15 May 2008 - 01:41 AM

Here's my idea on a net gun/coupler attachment:

The coupler:
Make a quad-barrel mod for the nerf gun of your choosing by taking a big (idk the diameter)inch to 1/2inch reducer and place 4 barrels around a central barrel(a little bigger than 1/2inch so you can stuff the net into it) like so:
O O O (these should fit inside the reducer and then the reducer should be able to couple onto a nerf gun)

You are going to plug the back of the center barrel and then glue/set all of the barrels in the reducer but before you do wrap the front part of the central barrel with electrical tape and put all 4 barrels on so they angle outwards a little bit. Seal any gaps that remain.

Now onto the net(s):
Take the (I haven't determined the optimal net size yet) in square of net and 4 darts of your choosing,(I am going to use some 2 1/2inch stefans) put a hole in each end and a bit of hot glue in one side, put a corner of the net in the hot glued hole, place the weight of your choice on top of the hotglue/net corner and seal the top with a bit more hot glue. Do the same thing for the other 3 sides.

Now to load the attachment(yes, I am planning to make multiples and have them like an ammo belt that will run across my chest like one time use cartridges):
scrunch/twist the net into a long little wad with the darts at the top to where it sort of resembles a grappling hook and place the darts in each barrel and then the long wad of net into the middle.

Now when you fire it all 4 darts should shoot out sort of angled outwards thus pulling out the net and opening it up all the way.

when I actually make a complete version I will post a full write up + pics

In Topic: Modifying A Longshot?

14 April 2008 - 09:34 AM

What is the highest strength spring that you can put into an LS without it breaking/having to reinforce the bolt sled?

And how can you reinforce the bolt sled if you needed to?

The most powerful spring I have put in one is the spring from a Vortex Firestorm. Those things are ridiculously strong. It's a little bigger than a stock LS spring and it fits inside the LS spring so it was just perfect. The only problem was that I had to replace the catch spring with a stronger spring that I had in my spare parts bin because sometimes the thing would just fire randomly.

In Topic: Avatars

18 March 2008 - 10:38 AM

Yea!!! It would be great if we could upload our own avatar pics.