Well, a while ago I bough a couple of the dart tag guns, and they came with these little pistols that I thought would be pretty bad.
But I figured I'd give them a shot (pun intended) and they were pretty decent, at least for stock.
So I decided to modify them, and long story short, now I know how to mod it, but not how to put it back together (shame on me, I should have taken pictures of it while open before modding it.)
So now I turn to you guys, and hopefully I can get some help here. Pictures of the inside of the gun?
So, I had a maverick, and one too many mods to the turret left it hard to use and undependable.
I decided to single it by removing the turret, putting some 1/2 inch sch. 40 pvc onto it, with a coupler at the end so it can fit into the end of the gun, where the bullets fired out of the turret. There's a little empty chamber there that looks cool, and it turns out that it can house a 1/2 inch pvc coupler perfectly.
I then sealed up the space between the pvc and the oval through which the air flows, and wrapped the barrel in some duct tape for stability. It seems, however, that my stock micros are too tight, such that I need to take the barrel apart to get them out, and my taggers are too loose, such that they won't stat in the gun. It either doesn't fire, or fires a tagger less than 5 feet.
I got a ls yesterday and, right out of the box it was leaking air (I think.)
When I fired it, the dart (streamline) went around 25 feet, and the gun made the normal firing noise followed by a long low hiss.
It's also really inaccurate. It can only sometimes hit a 2'x2' square at 20 feet.
Rather disappointing. I know that longshots can be better than this, getting pretty good accuracy at this range.
Can anyone suggest an easy mod for this thing?
All right, here it is:
1.Get a dtg, get an atom blaster
2. Drill out as much of the outside of the turret (in between the barrels at the front) as possible, so you have about 2 inches inside the turret
3. do a total minimization of the atom blaster
4. stick it in there.
5. have a dtg with a sidearm built in
It's like a grenade launcher in front of an assault rifle, like peanut butter and jelly
Would this work?
So, I have some 1/2 inch steel lying around, and it has more friction with a micro than pvc does. I know this helps as far as range and power, but I don't want to stick this in my bbb without knowing for sure if I'm right. Am I?