Jump to content


The Dart Blaster

Member Since 21 Aug 2013
Offline Last Active Oct 12 2013 03:30 PM

Topics I've Started

Stock Darts Cut In Half

25 August 2013 - 12:15 AM

I was thinking, dart length is one of the reasons streamlines/elites fishtail at long ranges, right? So would cutting off the bottom half of the dart and just using the half with the head on it increase performance in non-clipped blasters such as the crossfire, strongarm, or triad? If this is completely wrong, well, shows how little I know about how darts work. Thanks,

The Dart Blaster

[Solved] Problem With Raider

23 August 2013 - 04:27 PM

A few days ago, I decided to mod my Raider. After looking at an internals picture, I reassembled the gun (It was taken apart for reasons I don't remember). So far I have not done any extensive mods, in fact, I haven't even removed the AR (yet).
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
(Please tell me the images worked)
So, as you can see (hopefully), I have removed all the locks in the gun, and taped the over-pressure release thing. I tested the gun, and it did almost nothing. Some of the darts fell out of the barrel (shown here, hopefully),
Posted Image[/URL]
while other dart didn't even move. After that, I tried putting a dart in the breech by hand, and when I fired, it shot a reasonable distance for a mostly stock blaster. So, basically, I have a Raider that won't fire out of a clip. If anyone knows why this might be happening, or sees anything wrong with my internals, please post. Thanks in advance,

The Dart Blaster

EDIT: Yay, the pictures worked!