Zack Dorris

Hello fellow nerfers I recently received an EAT in a trade and I removed the locks and ARs. I have one slight problem though. I think I took out a lock that shouldn't have been taken out. Here is a picture of my internals now.

Please tell me if I took out a lock that shouldn't have been because my mag falls out when I prime back the blaster. Thanks in advance.

I was recently looking at the 2013 Mod Contest results and I noticed on Greiver2112's roughcut 2 to 1 mod Langley said if he used 2 couplers it would be like a pump action double Nitefinder. I decided to try that, and I succeeded. So here you go.
MATERIALS
2x 1/2 CPVC couplers
2x 3/4 CPVC couplers
1x nerf Elite Roughcut
1x Hot Glue Gun
2x Hot Glue Sticks
Electrical Tape
Hammer
Dremel and Cutting bit
Thats about it. Lets start.

Here is your internals. Take the barrell assembly out by turning the white peice to seperate the assembly from the slide and trigger.

Now take the barrells of of the plunger assembly. It should just slide off. Next take your 3/4 and 1/2" couplers and wrap the 1/2" couplers in E-Tape until you have to hammer them into the 3/4" couplers. They wont come out when you pull your barrells off the coupler. Try and make them even.

Now take your plungers and hot glue the coupler combination to the front of the plunger assembly. I know there are better options to hotglue but I only have hotglue at them moment. Expoxy would be better, but like I said I have none.

Now here comes the fun part. Take your dremel and cut the shell like so. This is so the Plunger assembly will fit in the shell.

Put the barrel assembly back on the rest of the internals. The white piece you turned earlier to get the plungers off is a pain to put back on. You have to turn it and push the orange pieces apart a bit to get it in the groove.
When you put the shell back on and screw it back together it should look like this.

The whole blaster

Comments and Criticism welcome.

Okay so I always loved the tac rail connector on the Strikefire and wanted to use it for a last resort on my bottom tac rail on my Retaliator, but I hated how it fired about 15'. I decided to try to make that at least 25' and I would be happy. My ranges after doing this were 24' 24' 25' 26' 26' with the new Suction Darts and 22' 22' 25' 27' 30' with regular Elite Darts. I was pretty happy. Let's begin!
MATERIALS
Hot glue gun
Strikefire
Screwdriver that you use to open Nerf Blasters
Pliers
Solid surface to work on
2 pennies

When you open up your blaster and this is what you should find.

Take your front barrel/ plunger and cut it like this with you dremel or other method of shredding plastic at the seam.

Take out the AR and hot-glue it back together like so.

Pretty good for not using a hot glue gun for over a year.
Next take 2 pennies and only 2. the blaster wont catch correctly if you use more than 2. Put them behind the spring.

Finally put your blaster back together. Looks stock on the outside.

Good Job. This was my first write up and I would appreciate comments and constructive criticism. Thanks for reading.

I was wondering if I could post an external mod for a longstrike. I made my longstrike like a musket and I made a ramrod that works and it is attached to the barrell extension tactical rail. I was going to make a write up for it and I was wondering if stuff like this was allowed?

I am planning on having a few wars this summer in the park in my town or in the woods behind my house.
I live 30 minutes north of Marion in Benton for you guys and girl in Bloomington.
At the park there is bathrooms. There is multiple playgrounds and a big field by one of the bigger ones.
At my house there are trees. If you want to make the trek or just ride a four wheeler you can go in my pole barn bathroom.
PM me if you want to help organize or some.

Edit: I am bringing friends if I have one. I have many loaners for people to borrow. Just tell me if you want to bring friends and I have blasters the can use.
Also homeades are allowed just no exposed metal on the tips. Hot glue domes are allowed. Just don't bring something that can seriously hurt anyone.