cchevelless

Whats up guys, I was going through ebay like usual and I saw this: I was wondering if anybody has heard about a new version of this coming out. I know a few vortex blasters came out in the sonic series so yeah. I just thought if you haven't heard of it check this thing out. Here is the ebay link: http://www.ebay.com/...=item1e7cb57e7d

Hey everybody this is my first modification write up. This is My Nerf Dart Tag Sharp Shot Modification Guide.

What you will need: A Dart Tag Sharp Shot, one 1/2 inch cpvc coupler, E-Tape or Teflon tape, a drill or a dremel and a phillips head screw driver.

Step 1 : Start off with a stock Sharp Shot

Step 2 : Remove all the screws, they are all phillip head screws.

Step 3 : After you remove all the screws remove the side plates and slide. P.S there is a hidden screw.

Here is a shot of the internals.

Step 4 : Remove these pieces. You will be modding these.

Step 5 : Drill or dremel out the air restrictor until it looks like this.
BEFORE :
AFTER :
Step 6 : Put E-tape or Teflon tape under the O-ring and over the hole.

Step 7 : Put the 1/2 inch cpvc coupler on the end of the plunger rod like so. It fits on with just friction.

Step 8 : Drill or dremel out this until you can fit the 1/2 cpvc coupler in it snuggley.



Step 9 : Fit it together like so.

Step 10 : Put the internals back together and put two nickles behind the spring.

Step 11 : Put the gun back together.
Ranges I am getting are 45 - 55 + feet with 1.5 inch single bb dome darts.
Questions, flames?