Here is my PVC Couplered Panther which I finally found at my local Walmart. I made a nice locking Brass Breech as well nested into some PVC. Hits about 100' or so with weighted Stefans.
--snipped-- Glad to see another "Tek Titan"!! Good job man. When I built mine I was surprised how well the titan tank fit In the Tek 6 shell. Almost made for it.
USER WAS WARNED FOR THIS POST
Quoting posts full of pictures is bad when you add only one line. Also, this thread is for pictures
Yes, I believe that that is all that you can do AR-wise, but it is the plugged pump, any seal improvements (if there need to be any), and either a rebarrel or jamming some brass into the barrel that will really boost your ranges. In my Buzz Bee blasters, I have found that just taking the AR peg out does not really help improve ranges much, if at all.
I actually picked up another and snapped off the AR peg closer to the base using a flat head again. It seemed to boost the ranges of the stock darts about 10 ft. Drop starts to occur when shooting flat at about the 35-40ft mark (I'm 6ft). I'd like to install a breech although will take a bit of planning if I want to retain the stock pump configuration which I honestly don't mind. I have yet to plug the pump and am hitting right around 50ft flat. May do that to see how well the ranges increase.