Jump to content


StraXXuS

Member Since 19 Jan 2012
Offline Last Active Oct 08 2016 08:04 PM

Topics I've Started

Need spring for homemade project

04 November 2013 - 11:37 PM

I need a spring that is 13" in length and about 5/8" inner diameter. Anyone know of anything that fits these specs?

New Buzz Bee Sidewinder

02 November 2013 - 02:13 AM

I was at my local Wal-mart and saw one of these:Not my pic(Pic from the late Urban Taggers blog) I searched the interwebs for any specs or internal pics, but was sorely dissapointed to find only one website that had very few. So now I ask the Nic, Does anyone have one of these that they've busted open? The main thing I'm looking for is if the pump has enough draw to fill an at3k tank with one pump.

Now open for commissions

17 December 2012 - 11:50 PM

Title pretty much sums it up, rates are below. I need to raise some money for things and thought,"Hey, why not get paid to do something I like doing?" At the moment I do not have pictures to show my previous work, so its all just claims. So far I've completed successfully: 5 voltage mods(all still working the way they did at the time of modding), 10+ AR removals, 10+ Seal upgrades, 5 spring replacements,3 integrations, several brass barrels(not breech, barrel), and 1 cosmetic mod. If any of you out there decide you want to gauge my skills and would like to purchase my services, send me a pm and we can work it out. Buyer pays for shipping and blaster(unless you provide it).

Rates:
ar removal/seal improvement: free with any other semi-advanced mod, or $5 alone
spring replacement: if you send me the spring to replace, its free with any other mod purchase. otherwise you pay for the spring and the other mod
barrel replacement: depends on what barrel you want, if not specified I will use 17/32 brass for a total cost of $15. If barrel material is provided, cost is $8. If barrel material is not provided, but is specified, you pay for the barrel only.
integrations: can vary from $5 to $20 depending on the complexity of the integration.

I will do paintjobs upon request, you pay for paint and shipping if I don't have the paint. Shipping and labor if I do. Pics of previous projects upon request.

Special offer: free ar removal and seal improvement with any paintjob.

TL;DR, middle of the road services for cheap. Thanks for reading and goodbye.

P.S.: Yes my rep on here isnt the greatest. Im more of a lurker. that is all
USER WAS WARNED FOR THIS POST

This is not the trading forum. Having no evidence of your work does not a good commissions thread make.

longshot lubrication problems

18 July 2012 - 03:43 PM

I recently brass barreled my longshot, along with adding two springs, and it got ranges of 120'+ angled. after a few shots though I noticed the ranges dropping down to about 80'. so I went and opened it up and it had worn the lubricant off. now Ive tried multiple lubricants already but cant seem to find one that works. so I was wondering what lubricant any of you would reccomend for a longshot?

The Hailfire letdown

27 April 2012 - 01:53 PM

Hasbro released a teaser video for the elite hailfire on their facebook page. This video let on to just how much of a let-down the hailfire is. Turns out all those who thought it was a flywheel blaster were right. And even though it has the capacity for 8 clips, hasbro decided to only package it with 4. On the upside however, we now know that the front handle is what advances the clip mechanism. What aggravates me the most, is that hasbro decided that the blaster with the highest dart capacity should be semi-auto(thats right its semi even though it can hold up to 144 darts) rather than full auto. Anyone else feel finger cramps coming on?