Jump to content


Member Since 31 Dec 2011
Offline Last Active Jul 31 2012 04:59 PM

Posts I've Made

In Topic: 5 $ 5 minute 100 ft homemade

08 April 2012 - 03:30 PM

Nice to see an old homemade brought back. Props! Was there any leakage from just that?

no the tightness of the 3/4 INCH THREADED MALE COUPLING and the hose nozzle when screwed together sandwiches the tire vale to the rim of the hose handle so well i have had it up to 100 psi left it for 20 minutes came back checked the psi and it was still at 100 psi it is a perfect seal

In Topic: new stronger smaller snap plunger head and new style pump snap

01 February 2012 - 06:21 AM

Yeah, I usually shave down a PVC fitting to make a similar shape (similar to how the Preeminent plunger heads are built). Polycarbonate is a better solution for the long-run; being harder than PVC, it won't get scratched up. PVC ramps can get pretty scratchy feeling after a year of use.

Now, if you're buying polycarbonate from mcmaster, then you really ought to just go the extra mile and buy a nylon rod and proper skirt head seal. That type of setup will last years, with only occasional cleaning and re-lubing required.

i have put over a 100 shot through it a no problems wha so ever
see the problem is i dont live in the states and dont have axces to mcmaster

In Topic: Homemades Picture Thread

30 January 2012 - 10:14 PM

a pump snap that has a new stye prime and catch that is more reliable stronger and smaller

Posted Image
smaller plunger head
Posted Image

more info stroke 4 inches
springs lanard shotgun nitefinder and a 2 inch by 3/4 id spring
this give me lots of power
ranges 90s
it ways about 5 or 6 pounds because of the 40 screw i had to put in it

In Topic: Nerfhaven Homemade Directory

30 January 2012 - 10:10 PM