powert00l

Simple solution. Go, save yourself the $20 in materials, and buy one of these.

http://www.target.co...18/-/A-12226657

You get an 18-round drum clip that isn't too obtrusive, fugly and, as a BONUS you get another clip-fed blaster as an integration base, concept gun or simply a parts scavenger!

I can't buy another gun, don't need the parts scavenger, and don't want to save $20. And I'm transitioning to full on pellet guns and Enfield .22's. Also, the clip does work this way. Look up STANAG magazine. It has a straight and a curved section. IT WORKS. DON'T TRY THAT FLAME.

Blue, I had my mags sort of painted, and as mentioned in the OP this is only a mockup for handling. And these mags work fine, BTW. It's the gun that blew the plunger head.

What I mean by homemade clips, which would go into Homemades is that NONE of the clip is stock. In this case everything above the ridge is kept stock, therefore maintaining contact points intact.

Yes, the darts will be crushed a bit, that's why this is only a NATO style curve, and nothing as drastic as let's say an Automatika Kalashnikova Model 1947, or AK47.

Hamoidar, read the OP entirely. The pictures state that they are a mockup. Plus if the pusher plate could not transition, the. why does the AR15 and NATO standard mag work? Same idea, different material.

BTW, sorry for replies in one post, I'm still an FNG as of right now.