Jump to content


chavez guy

Member Since 17 May 2011
Offline Last Active Apr 30 2018 12:27 AM

Topics I've Started

San Diego Nerfers?

03 January 2012 - 06:50 PM

Are there any other nerfers here in sunny San Diego? Are there any wars that happen here regularly or semi regularly? I researched old war threads and it seems that there hasn't been a SDNO since I was in elementary school. I just want to know if there is a substantial nerf community here I am not aware of.

If I am violating some sort of rule, let me know.

Edit: If you live anywhere near SD that counts too. A buddy of mine said there is an HvZ thing at SDSU, so I'm sure there are some nerfers in the area.

Draw Extended Nite Finder

23 October 2011 - 02:06 PM

A friend gave me a nite finder and I wanted to try something new with it. So here I have a draw extended nite finder that is very simple and easy to make. Some of it is as simple as re-arranging some stuff. I havent seen a write up for one of these in the mod directory (hint, hint) or one that does it in a way similar to this one.
Posted Image Posted Image
As you can see, there is E-putty and chunks of plastic plastered to the shell. I will get to those later. As you can see, the front of the plunger tube is jutting out the front of the shell. This allows for more air to get pushed out, as the plunger rod is long enough for this.

Firstly and foremost, do the whole seal improvements, [k26] spring replacement, catch spring replacement, shell minimization, and CPVC coupler mods as one would normally do. The way I do my coupler (cutting some off, gooping it into the PT) gives me pretty much no deadspace. Now for extending the draw, you see those two tabs on the PT? Yeah, do NOT cut those off. Those are pivotal (or at least structurally vital) to this mod. As you can see from the two photos above, the tabs are sticking out of the slots in the sides of the shell. The biggest ammount of work to this mod is securing those tabs in place without using obscene ammounts of glue or anything (I like making my blasters so that I can open them up and work on them later).

First you will need to cut the shell a bit to get the tabs to fit. Then you have to attach something to make it so that the PT cannot move back and forth in the shell. I used pieces of the ammo holders and ARs, but I'm sure it can be done with polycarb scraps or something that looks neater than this. This is what the side of the shell without the screws looks like after cutting and making the support things:
Posted Image
And the inside:
Posted Image
The reason I puttied that orange AR (the piece with 3 prongs, just cut off the prongs) in there is because when you place the tab there after making the cut, no part of the shell is supporting the back part of it, so that is what that AR piece does.


As for the other side of the shell:
Posted Image
Posted Image
The reason I have all that putty towards the front of the shell is that I cut too much and needed to fill some of the gap back in. But the support piece (made from a piece of the ammo holder, polycarb, or whatever) is the same as the other side of the shell.

So when you are putting it back together it should look like this:
Posted Image
Posted Image

And if you did it right, you should be done. I like to either use a 21/32" CPVC slide breech or a speedloader on it.
Posted Image

Harpoon Blaster OPV issue.

24 June 2011 - 10:51 PM

After my Lego Harpoon Blaster (Basically a 4B) came in the mail, I realized the overpressure valve does not kick in. I remembered Coop mentioning that in a video, and I was wondering if anyone else has had the same issue with the Harpoon Blaster. I searched and did not find a fix. Anybody else find a fix to this issue?