#1
Posted 09 October 2007 - 07:13 PM
I'm not sure how many of you actually know how an STS works so I'll try to explain. The air comes from the pump into the first chamber and then the second chamber. The trigger is part of the first chamber. When the gun is fully pumped, both chambers are at a high pressure. When you press the trigger, the pressure in the first chamber decreases because air goes out the trigger hole. The pressure from the second chamber wants to go to the first. So while the air is going from the second to the first, the cap is forced closed and air is released from the second chamber out to the barrel.
(I drew this in paint like 2-3 years ago )
http://i4.photobucke...C/SSPBValve.bmp
(Image wouldn't display here so I posted a url)
So when you connect all the STS's together by the first chamber, Pressing one trigger fires all 4.
I might try putting something like this on the front of a XXL Missile.
#2
Posted 09 October 2007 - 07:35 PM
Edited by Banshee, 09 October 2007 - 07:35 PM.
#3
Posted 09 October 2007 - 07:38 PM
In terms of improving the grenade idea, maybe you should try shotgun barrel attachments. The Pocket Blaster may not have enough power to drive them, but if it does, it should increase the amount of darts in the air.
#4
Posted 09 October 2007 - 07:44 PM
#5
Posted 09 October 2007 - 08:00 PM
I will definitely be buying a few more of these for experimentation.
"...Exploring?"
#6
Posted 09 October 2007 - 08:08 PM
Edited by Forsaken_angel24, 09 October 2007 - 08:09 PM.
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#7
Posted 09 October 2007 - 08:13 PM
That's awesome! Did you just cut into the sides of the first chambers on each of them and tube them together?
I will definitely be buying a few more of these for experimentation.
Lefty likes to refer to them as STS's, or Secret Target Strikes. That's the n-strike name for them I believe.
#8
Posted 09 October 2007 - 09:22 PM
It worked for a while but something's wrong now.
You just have to drill a 1/4" hole and superglue vinyl there. The two on the sides in the picture are connected from where the pump hole was. The top one is connected to the left one, the right one is connected to the bottom one..
#9
Posted 09 October 2007 - 09:34 PM
This mod is one of the most original mod I've seen in a while.
#10
Posted 09 October 2007 - 09:56 PM
#11
Posted 09 October 2007 - 10:19 PM
I went into the choir room today and told the teacher," I can ony sing base" she said," I can fix that" she gave me a prompt kick in the nuts; i've been singing soprano ever since.
~DART
#12
Posted 10 October 2007 - 09:06 AM
I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?
My TTG mod.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users