OK! This will be a micro ammo holder in 6 steps.
- Take the camera out.
- With a box-cutter or a exacto knife, cut out the top of the rectangular prism at the edges.
- Remove excess cardboard.
- Duct tape or masking tape (I used masking) the sides of the prism.
- Attach a lanyard to the top of the back (the tallest side).
- Stuff with micros.
It works pretty well until there are like 4 left then it gets a little harder.
Edited by Lynx, 18 August 2008 - 01:52 PM.