32 replies to this topic

[nat]

Do you see the green thing in the middle of the turret? Do i need to take that out so i can perform this mod? If so how do i take it out.

[ompa]

The screw on the front end center of the turret. From the look of the mod in the link I sent you, you're going to need to at least take that front screw out in order to remove the barrel covers, to get at the pegs. Whether or not that green piece comes off doesn't really directly affect the mod. The fact that the green piece comes off is just a side effect of taking the front screw out.

It's also possible that there is a new version of the gun out, where the two parts are fused together. If it looks like they are one piece/are fused with glue, then you probably can't detach it. If the whole assembly is for some reason fused, your best bet is to pull out the pegs, or drill through them, and then jam barrels that can fit in the housing all the way down, hot-gluing from the base of the turret. Otherwise, you can just cut around the entire housing, accomplishing what Z-man did in his mod, although it will look a whole lot messier.

*****\/Read the following\/*****
Did you seriously not read what I said? Fix your capitalization, or I will suspend you. I don't want to have to, but your disregard for the CoC is becoming all too obvious. There is a list of people who have been suspended for doing stupid little things like not using capitalization after multiple warnings. Don't add yourself to that list.

~ompa

[nat]

Thanks, My tek 10 is the same one as on the link you gave me.

Edited by nat, 13 April 2008 - 06:00 PM.

[2nd Sniper]

I am lead to believe that the one dEffeminateted in the picture, (even though was made by buzzbee) was the model sold in a singular pack. I got a pair of these together, and the don't have the 2 parts to the turret. So instead of being able to split the turret, you'll unfortunately have to take the more round about way of sawing everything off.

opps, sorry for opening up an old thread. I totally missed that.

[nat]

No 2ndsniper I just got the turret apart half an hour ago, but there was a crap load of glue on it.(And stabbed myself a few times with the screw driver I was prying with)

[nerfguy47]

Does anyone think it would be capeable of rear loading.

Edited by nerfguy47, 23 February 2011 - 04:15 PM.

[Exo]

nerfguy47, on Feb 22 2011, 01:43 PM, said:

does anyone think it would be capeable of rear loading

Ouch. Did you read the COC? This thread is over two years old. And you just necroed it for the umpteenth time. Next time, just go to the chat room where you can ask all kinds of necrosis-inducing questions. Or, try it on you own.

[nerfguy47]

Exo, on Feb 22 2011, 07:41 PM, said:

nerfguy47, on Feb 22 2011, 01:43 PM, said:

does anyone think it would be capeable of rear loading

Ouch. Did you read the COC? This thread is over two years old. And you just necroed it for the umpteenth time. Next time, just go to the chat room where you can ask all kinds of necrosis-inducing questions. Or, try it on you own.

thanks for the tip i will