Jump to content


Photo

At2k Problem

I can't open it!

4 replies to this topic

#1 nerfboy 32

nerfboy 32

    Member

  • Members
  • 22 posts
  • Location:Pittsburgh, PA

Posted 15 May 2007 - 06:18 PM

okay, so I just got 2 at2ks from my friend, and I have the supplies needed to mod them. I took all of the screws out, but the small area that covers the bit the pump goes into will not come off! (you know, the piece about 2 inches in front of the trigger guard.) It is not welded on, that much I am sure of. So what do I do? (I have already tried screwdrivers, X-acto knives, and saws)
  • 0
~monkey with a gun~

For Sale: One parachute, used once, never opened, small stain.
()_()
( '_' )
( ^^ )
. ()() This joke has been brought to you by funny bunny

#2 One Man Clan

One Man Clan

    TOFTS

  • Contributors
  • 2,170 posts
  • State:New Jersey
  • Country:United States

Posted 15 May 2007 - 06:27 PM

Just rip that shit apart.
  • 0
I hate you.

#3 Team Slaya

Team Slaya

    Member

  • Members
  • 615 posts
  • Location:Massachusetts

Posted 15 May 2007 - 09:38 PM

The saw worked for me. Saw around the cap, but not too far. When you think you've done enough, grab a flathead screwdriver and pry it off. Easy.

TS
  • 0

#4 imaseoulman

imaseoulman

    Member

  • Members
  • 1,005 posts
  • Location:DFW
  • State:Texas
  • Country:United States

Posted 16 May 2007 - 08:06 AM

okay, so I just got 2 at2ks from my friend, and I have the supplies needed to mod them. I took all of the screws out, but the small area that covers the bit the pump goes into will not come off! (you know, the piece about 2 inches in front of the trigger guard.) It is not welded on, that much I am sure of. So what do I do? (I have already tried screwdrivers, X-acto knives, and saws)


I have modded several at2k's and the best thing to do is to just pull apart the two halves from the back of the gun until you can either pull the top half (assuming it has been lying on the ground or on a work bench) out or until you here a crack. Nine times out of ten you'll get a really neat crack on the top of that circular cap. After you put the gun back together you can't even tell it was ever cracked.
  • 0

#5 nerfboy 32

nerfboy 32

    Member

  • Members
  • 22 posts
  • Location:Pittsburgh, PA

Posted 19 May 2007 - 07:17 AM

I sawed up the middle of the cap and then pulled the two halves apart. Thank you for all of your suggestions.
  • 0
~monkey with a gun~

For Sale: One parachute, used once, never opened, small stain.
()_()
( '_' )
( ^^ )
. ()() This joke has been brought to you by funny bunny


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users