Jump to content


Photo

Longshot Mag Combination

1 mag + 1 mag = 12 dart mag

57 replies to this topic

#26 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 23 February 2007 - 06:34 PM

Turns out my first custom-wound spring was made with the wrong kind of wire.
Lesson learned, but I don't really have time to order new wire and wind another right now. I have researched how it might be possible for me to mold my own high capacity magazines. But it's something I will attempt at a much later date. Because frankly making one using the method I listed in this thread is really easy to do if you take your time and use the right tools.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#27 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 24 February 2007 - 10:40 AM

So Captain, is there a special type of wire to use for custom made springs? It would save alot of us time if we used the right wire, instead of using a half-ass spring and replacing it after a few months.
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#28 LastManAlive

LastManAlive

    Member

  • Members
  • 686 posts

Posted 24 February 2007 - 12:15 PM

Try going to a gunstore near you and buy some ak47 mags real cheap (I can get crapola ones for like 5 bucks) for the spring inside and for a case from an ak mag. Might come in use in the later future. I plan to save some money up and buy a few mags when I ever get successful design plans for a drum clip.
  • 0
He came, He saw, and he conquered... But where did everyone go?

#29 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 24 February 2007 - 03:04 PM

I used .033" black oxide coated steel wire when I should have use .033" stainless steel spring temper wire. To make a spring you need wire with the right hardness.

Try going to a gunstore near you and buy some ak47 mags real cheap (I can get crapola ones for like 5 bucks) for the spring inside and for a case from an ak mag. Might come in use in the later future. I plan to save some money up and buy a few mags when I ever get successful design plans for a drum clip.

Unless you know for a fact that it will fit in and work as a replacement for the longshot mag spring, don't post this as a suggestion.

Edited by CaptainSlug, 24 February 2007 - 03:05 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#30 zipmaster

zipmaster

    Member

  • Members
  • 2 posts

Posted 06 May 2007 - 06:30 PM

I cant express enough how important it is for you to cut the two clips using a good tool. I just tried this with a hacksaw and It's impossible for me to align the two enough to get it to work.
  • 0

#31 AJAQ

AJAQ

    Member

  • Members
  • 312 posts

Posted 06 May 2007 - 07:22 PM

AMEN. If it is slightly off, it push bar will jam at the connenction.
  • 0
~AJAQ~

#32 mini

mini

    Member

  • Members
  • 48 posts

Posted 09 May 2007 - 08:08 PM

AMEN. If it is slightly off, it push bar will jam at the connenction.


Theres a very simple way to fix the badly cut clip. It involves attaching 4 strips of brass, 2 on each side. The strips force the clips to line up perfectly. Ill post pictures tomorrow if needed.
  • 0

#33 nerfer909

nerfer909

    Member

  • Banned
  • 141 posts

Posted 10 May 2007 - 06:41 PM

Or you could just give the clip a little squeeze to advance it if it is uneven.
QUOTE
Step 1: Throw TTG against wall.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.


Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.

#34 tensor

tensor

    Member

  • Banned
  • 6 posts

Posted 20 May 2007 - 05:11 PM

i thought of another way 2 make the clip better. u put it on top of the gun so gravity feeds it but u hav an opening on both top and bottom. the bottom opening is 4 the darts 2 actually go in 2 the barrel. the top is so u can load darts into the clip without taking the entire clip out. u can just pick up darts and put them in the clip. idk how it would work with the bolt sticking out at the top. i didnt want 2 try this out on my own cuz the only mods ive ever done is adding rubber bands 2 stuff

#35 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 20 May 2007 - 07:06 PM

1. Your post quality is terrible and trying to decipher what the hell you were saying was painful.
2. Your idea is crap since you obviously haven't examined how the parts interact. The hardpoint for pulling the bolt back is on the top of the bolt and makes it impossible to load from the top of the gun.

If you don't know what you're talking about, then don't say anything.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#36 Pineapple

Pineapple

    Old-school Admin

  • Contributors
  • 1,377 posts

Posted 20 May 2007 - 07:58 PM

I believe I made my point clear.

And it seems to be of no consequence. Until now.




tensor,

ur member account at NerfHaven has bin tempararily suspended.

ur account will not b functional til October 24, 2034, 2:54 p.m. (depending on ur timezone). This is n automated process and u do not need to do anything to expediate d unsuspension prosess.

Bord Adres: http://nerfhaven.com/forums/index.php




Anyone else want to play games or test us? Now's the time.

Anyone don't like it here? Go to NHQ.
  • 0
-Piney- of White Dog Hobbies Armory


<!--quoteo(post=209846:date=Feb 5 2009, 06:27 PM:name=boom)--><div class='quotetop'>QUOTE(boom @ Feb 5 2009, 06:27 PM) View Post</div><div class='quotemain'><!--quotec-->
It's to bad you live in hawaii I bet there are not many wars there.Wait what am I saying<b> you live in hawaii you lucky bastard.</b>
<!--QuoteEnd--></div><!--QuoteEEnd-->

#37 nerfmodder420

nerfmodder420

    Member

  • Members
  • 15 posts

Posted 23 May 2007 - 03:15 PM

I just made one of these with my longshot mags. And i have to say i am very pleased with the results. Thanks for putting this write-up on here it was most useful. :)
  • 0
BROOD XIII

#38 Liam

Liam

    Member

  • Members
  • 207 posts

Posted 02 June 2007 - 06:01 PM

Great job slug. this looks pretty easy is it not? im definetley gonna consider doing this but just incase ill buy a few extra clips first.
  • 0
The chances of one person taking a bomb on a plane are one in a million. The chances of two people taking a bomb on a plane are one in a trillion. So if you're scared of a terrorist attack, bring a bomb on a plane.

#39 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 02 June 2007 - 06:08 PM

It's only easy if you have a table saw. Otherwise it can be difficult.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#40 Shorty

Shorty

    Member

  • Banned
  • 157 posts

Posted 10 June 2007 - 07:34 PM

I have a question Cap. Slug. I have this Spray trim Adhesive and was wondering if I can use that. I mean, I can allways reenforce the clip with anything else from outside the clip. I wanna use this glue spray because it has a better chance of not leaving a seem on the inside. Also, could you show me what kind of washers, bolts and nuts you used.

Thanks

Edited by Shorty, 10 June 2007 - 07:36 PM.

I love imports.
DarkShrimp is the next Piney.
"Ignorance can be fixed. Stupidity is forever."

#41 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 10 June 2007 - 09:20 PM

No. You need a structural adhesive like super glue (cyanoacrylite) or a solvent adhesive like IPS Weld-on #3. If you use either of those and have squarely cut halves you won't even be able to tell that the pieces were not originally molded as one unit.
Posted Image

I just used short #6-32 screws, #8 washers, and #6-32 hex nuts.

Edited by CaptainSlug, 10 June 2007 - 09:21 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#42 Shorty

Shorty

    Member

  • Banned
  • 157 posts

Posted 11 June 2007 - 09:17 PM

Its OK. I instead used something thats like a cross-breed of a glue gun and a soldering tool. I basically melted the two parts together and used the same raw plastic to reenforce it. I'll get pictures later.
I love imports.
DarkShrimp is the next Piney.
"Ignorance can be fixed. Stupidity is forever."

#43 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 11 June 2007 - 11:24 PM

Its OK. I instead used something thats like a cross-breed of a glue gun and a soldering tool. I basically melted the two parts together and used the same raw plastic to reenforce it. I'll get pictures later.


Does it blow hot air out from a small tip, and have another to feed a thin rod through? Sounds like a plastic welder, but not sure for certain. I've been looking to buy one for some time now, but they're expensive. Post some pictures of it if you can.
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#44 Shorty

Shorty

    Member

  • Banned
  • 157 posts

Posted 12 June 2007 - 07:58 PM

Its OK. I instead used something thats like a cross-breed of a glue gun and a soldering tool. I basically melted the two parts together and used the same raw plastic to reenforce it. I'll get pictures later.


Does it blow hot air out from a small tip, and have another to feed a thin rod through? Sounds like a plastic welder, but not sure for certain. I've been looking to buy one for some time now, but they're expensive. Post some pictures of it if you can.

Yes thats exactly what it is. Though its kinda hard welding the pieces without making a dent on the inside of the rail. I ask my fater to do it since he knows how to control the tool better than me. I leaves the clip strudy but ugly. Tape should cover it.

Posted Image

Posted Image

Posted Image
I love imports.
DarkShrimp is the next Piney.
"Ignorance can be fixed. Stupidity is forever."

#45 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 13 June 2007 - 08:36 AM

You should have used some plastic welding rod, it wold have made a cleaner join.
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#46 Shorty

Shorty

    Member

  • Banned
  • 157 posts

Posted 13 June 2007 - 06:30 PM

You should have used some plastic welding rod, it wold have made a cleaner join.


I didnt have any so we just cut upped some rods from the same plastic of the leftover clip.
I love imports.
DarkShrimp is the next Piney.
"Ignorance can be fixed. Stupidity is forever."

#47 Jtcm

Jtcm

    Member

  • Members
  • 40 posts

Posted 13 June 2007 - 06:53 PM

Hey CaptainSlug I do have access to a table saw but I would like to know what sort of blade I should be using to avoid sending my mags halfway across the room or even worse cutting off a finger.

Edited by Jtcm, 13 June 2007 - 06:53 PM.

  • 0

#48 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 13 June 2007 - 08:22 PM

Plywood/OSB/Plastic/Veneer blades work best. The 180 or 200 tooth count ones.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#49 Coodude26

Coodude26

    Member

  • Banned
  • 77 posts

Posted 16 July 2007 - 01:31 PM

I hate to bump old topics but I feel like what I have to say may help some people: To make your own springs harder to bend, put it in some boiling water for a couple minutes and drop it in some icy water with some tongs. let it get to room temperature and repeat as necessary. Now the wire will be less bendy.

Hope I helped someone.

EDIT: Damn. Didn't see those posts. I guess this is a mini write-up know. Apologies.
PS: If someone could tell me how to delete my posts that would be great cause I keep making stupid mistakes like this.

Edited by Coodude26, 16 July 2007 - 01:39 PM.


#50 super geeK

super geeK

    Member

  • Members
  • 11 posts

Posted 15 August 2008 - 09:43 AM

wuts the follower thats slugs is talking about..all i did was cut the 2 mags in half..do u have to do anything to the thing thats pushes the dart up..nd the thing that pushes the dart up wont go all the way down..and wen it does...in wont go back up..help me :lol:

srry..didnt know it was an old thread..kinda new to this site..

Edited by super_geeK, 17 August 2008 - 10:30 AM.

  • 0
"You see this?!
No hair.
you know what that means
im aero-dynamic, i can take on danger."


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users