also would it help accuracy or distance by taking the barrel from the front gun and rreplacing the smaller barrel in the long gun?
Edited by maverick x, 11 September 2006 - 08:35 PM.
Posted 11 September 2006 - 08:34 PM
Edited by maverick x, 11 September 2006 - 08:35 PM.
Posted 11 September 2006 - 08:39 PM
Posted 11 September 2006 - 10:14 PM
Edited by maverick x, 11 September 2006 - 10:15 PM.
Posted 11 September 2006 - 10:24 PM
You can't replace just the barrel, you have to add a lip to the inside of the bolt as well and the ID of that lip has to match the ID of the barrel. And your barrel will have to meet up with the bolt when the bolt is in the forward position.so is putting 9/16 brass in the gun, instead of the barrel is the best barrel replacement?
besides barrel the best you can do to improve the gun is to remove the air restrictors, remove the peg, and put in a bbb spring (cut off 3 loops)? Is this true, is there more? is this wrong? i really want feed back.
Posted 11 September 2006 - 10:30 PM
You can't replace just the barrel, you have to add a lip to the inside of the bolt as well and the ID of that lip has to match the ID of the barrel. And your barrel will have to meet up with the bolt when the bolt is in the forward position.so is putting 9/16 brass in the gun, instead of the barrel is the best barrel replacement?
besides barrel the best you can do to improve the gun is to remove the air restrictors, remove the peg, and put in a bbb spring (cut off 3 loops)? Is this true, is there more? is this wrong? i really want feed back.
And 9/16" brass is much smaller than the stock barrel ID and will be difficult to secure in a way that will line it up perfectly with the brass insert you will have to add to the bolt.
The reason few people have done this is because you're not modifying just the barrel. The bolt and barrel have to meet up cleanly enough to form a seal. If they don't do that then there's very little advantage to a barrel replacement.
Posted 11 September 2006 - 10:37 PM
Edited by CaptainSlug, 11 September 2006 - 10:40 PM.
Posted 11 September 2006 - 11:05 PM
Posted 11 September 2006 - 11:32 PM
Posted 12 September 2006 - 01:57 AM
Posted 13 September 2006 - 09:46 PM
Posted 13 September 2006 - 10:07 PM
A short insert to put on the inside of the "mouth" of the bolt so that the new Inner Diameter matches the Inner Diameter of your barrel replacement.last question then i think i'll know what to do, what is a lip?
0 members, 0 guests, 0 anonymous users