35 replies to this topic

[Petrie]

I got open my magstrike today so tell me what you think

Edited by Petrie, 14 July 2006 - 09:59 PM.

[Uncle Hammer]

Ha, It looks exactly like a pc bladder cept the hose clamps and shit are white instead of yellow. O well, it's still a kick ass gun.

[sam]

Awesome, looks almost exactly like a PC, just rearranged. Could you take some pictures of the front and the back of the clips?

[WratH]

Those are more or less exactly PC internals, I wonder if we can get the clips to be interchangeable.

[Jikman]

Thanks Petrie!

I wonder what kind of mods can be done here.

[Ryan201821]

Thanks Petrie!

I wonder what kind of mods can be done here.

Well I guess we can band the bladder and plug the pump. Other than that I don't know.

[ompa]

Gut a few RF20's, take their bladders, hook them up, and make a backpack mod. Poof, you have an automatic that can go through (assuming this can go through 2 clips, and the RF20 bladder is bigger, and you have terrible reflexes) 6-7 clips.

~ompa

[pat 1st Lt]

Stupid endcaps. Looks like you had to force yours too. Well, I'm glad that someone finally got the internals up, so all those who didn't want to spend the extra $9 to get one from Walmart early.

I haven't been able to come up with any mods for it other than bands on the bladder (Which, oddly enough, didn't affect performance at all) and drilling out the restirctors.

Also, with a little filing/sanding it looks like Magstrike and PC mags can be made interchangable. I'll verify that after I get back from Karate: we've got a tournament and I have to leave in five minutes.






Sincereley,
Pat

[meiser5]

Here are some pics of the clip, the pic of the back of the clip is not present but it resembles the powerclip almost exactly.


Meiser---

[pat 1st Lt]

MAGSTRIKE AND POWERCLIP MAGS ARE INTERCHANGABLE!!!


I had to get that out of my system.


Now, onto the goodness.

On the lower side of the picture meiser just posted, the side with the belt-clip, there is a little ridge that keeps the magazine from going off course during loading. It isn't really needed, so go ahead and file it off. Now, there are six screws on the head of the magazine. Unsrew them, and the belt-clip should fall off. Either put the top back on without the belt-clip, or leave it off. Your Magstrike clips can now be used in a Magstrike, or a Powerclip.


Now, onto the Powerclip. On the side of the magazine without the advancing teeth, there is a little ridge that keeps the clip straight during loading, just like the Magstrike. It's on the same side as the Magstrike's, but it's father to the front. File that down, and your Powerclip mag can be used in a Powerclip, or a Magstrike.



This is my new Official Favorite Gun: I now have 6 mags for the Magstrike (4 Powerclip, 2 Magstrike)! It also holds a lot of air, and may be able to hold even more (I'm not sure if I could fit a RF20 bladder in the casing without too much destruction) . It's also very comfortable, and shoulders well. The big pump tube is perfect to fit a new, more efficient pump in. And, the gun looks so damn cool.


Not really an EDIT, but it's soemthing I just found out while typing this: 17/32" brass fits perfectly in the magstrike mag! It fits in all but the last 1/4" of the mag, which restricts a bit to hold the darts securley. At least I think this scrap is 17/32". It might be 1/2". No, it's 17/32".




So, yeah. I now love this gun. It's great. I'm definatley using this at Apoc!






Sincereley,
Pat

[footemps]

Anyone attempt to make a solid tank? We could overpressurize it like crazy for way more than 2 clips that way. Look at some pneumatic pumpkin shooters. They handle up to 400psi with certain types of pvc.

Hell, we could put a regulated paintball tank on there at that rate, lol. It already immitates paintball form with a double trigger, top loading ammo, and "air tank".

[meiser5]

Magstrike and powerclip clips are interchangeable and here is why...


If you take the belt clip out and,

scrape away the guideline on the end of the clip, the clip will match almost exactly (except for the top) with the PC clip.

Here are some more pics.







Sorry for my fugly feet being in the pic.

And one final pic of the clip in the gun...


Meiser----

[Petrie]

With the stock magstrike i have not been able to shoot more than one mag on the max of twenty pumps, it my be because of my timing or the restricrions of the gun but I have yet to get two mags off

Edited by Petrie, 14 July 2006 - 09:55 PM.

[CaptainCC]

As I suspected, a PowerClip in new casing. It's great.

[Forsaken angel24]

Is the plunger assembly accessable? in other words, can you get to the spring or is it epoxied shut?

If you can you should be able to add a 1/4" in length 1/2" in diameter ring of cpvc behind the spring making more air pressure to build up in the chamber before it is released. I did this with a RF20. Its shoots farther but fires slower. By adding some bike tubing to the bladder it should force air in faster increasing ROF. You would also need to extend the bladder so it holds more air. When I get my magstrike I will attempt this. I just want to know if you can get to the spring like the RF20 or if you would be greatly risking breaking the gun like wildfire.

[pat 1st Lt]

Is the plunger assembly accessable? in other words, can you get to the spring or is it epoxied shut?

I haven't tried, but since these are basically the exact same internals as a PC, if you can do it to a powerclip, you can do it to a Magstrike.







Sincereley,
Pat

[SG Pilot]

Awsome!

I'm going to the mall tomorrow. I'll see if I can find one. It's great to hear that you can use PC clips in Magstrikes and Magstrike clips in PCs with a little modification. If I get one, I'll have three clips, yay! (Darn you, Pat, lol). Thanks for the info.

[Ryan201821]

I am guessing the value of the PC and it's clips especially are going down..

Should have sold them when I had the chance. By the way..Did Hasbro say they were going to make extra clips available for sale?

[SgtSniper]

This sucks. I'm stuck in hicksville (Alabama), and you guys are half way to modding these things. They dont have these at any toy store here in Birmingham.

[LordoftheRing434]

Hmmm...this may just be the first gun I'll invest in since my NiteFinder. As said, it looks very much like a PC, and the only difference I can see is that this might even be easier to put back together after tampering. Looks tempting.

[tcorr911]

Does anybody know if PETG will also fit it the magazines just like the 17/32 brass.

P.S.- I just ordered one, yay!

[sam]

Does anybody know if PETG will also fit it the magazines just like the 17/32 brass.

P.S.- I just ordered one, yay!

I'd guess no, 17/32 brass is a hell of a lot smaller than PETG.

[tcorr911]

Ok because I was going to get some but, I didn't know if it would fit.

[Ryan201821]

Does anybody know if PETG will also fit it the magazines just like the 17/32 brass.

The PETG from McMaster-Carr is 5/8" OD. That is the smallest I've seen around. The only way you could get PETG in the clip was it you dremeled out the holes and "nested" the clip with PETG. I don't think nested is the right term but you know what I mean.

[vanpaun]

Does any one know if the magstrike is available in MA? I'm ghey and need to express myself with a different font.