Jump to content


Photo

Micro Titan

Renegade Style

21 replies to this topic

#1 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 05 February 2006 - 10:08 PM

This is my Micro Titan. RF20 tubing was used to connect the titan pump tube back to the airtank. Plumbers goop reinforced with hot glue keeps it steady and air tight.

Mods:

Over-Pressure release valve plugged

Bic Pen mod, which releases air twice as fast now

Air restrictors removed

Titan rocket air holes glued shut for maximum destruction

Posted Image
(Note: pump tube is spaced away from the gun to not interfere with the handle)

Posted Image



Duct tape soon to be replaced with E-tape, and hole in back cover replaced with foam craft sheeting.

Edited by Renegade, 05 February 2006 - 10:09 PM.

  • 0

#2 SolidiusSaint

SolidiusSaint

    Member

  • Banned
  • 31 posts
  • Location:Utah

Posted 05 February 2006 - 10:23 PM

Dude no offense but it looks really ugly, and looks uncomfertable to hold. Also its easier to pump from the back when the rockets in the fill, now the fins of the rocket get in the way when you pump. I give it a 2 out of 5 Mod rating. Good idea though, just needs rethinking

;)

Edited by SolidiusSaint, 05 February 2006 - 10:23 PM.

Only The Dead Have Seen The End Of War, We Have Never Known Of This But, Know This I Will Indeed Enjoy

#3 PissBacon

PissBacon

    Member

  • Members
  • 189 posts

Posted 05 February 2006 - 10:24 PM

Was it based on this?

It is a little smaller though, a good thing. Is pumping it awkward at all, or is there enough room?

P.S. I have the same exact keyboard.

EDIT: By the way, the second page shows some pics of it all purdied up.

Edited by PissBacon, 05 February 2006 - 10:26 PM.

  • 0

#4 NerfMonkey

NerfMonkey

    Member

  • Members
  • 1,820 posts
  • Location:Tucson, AZ
  • State:Arizona
  • Country:United States

Posted 05 February 2006 - 10:27 PM

Dude no offense but it looks really ugly, and looks uncomfertable to hold.  Also its easier to pump from the back when the rockets in the fill, now the fins of the rocket get in the way when you pump.  I give it a 2 out of 5 Mod rating. Good idea though, just needs rethinking

;)

Dude, have you ever seen the gun or held or pumped or fired it? No. You don't know what he'll use it for, how he'll use it or his motives for doing it how he did it.

He made the gun about 1/4 the size it was originally, I don't think Renegade was going for looks.

Take a look at the pump, the fins won't get in the way. And how would it be uncomfortable, it's got the same handle as before. He acheived what he set out to do.

Anyway, how would you propose making it smaller or more comfortable anway? Don't question someone else's reasons for doing something if you can't do it better.

EDIT: Okay Solidius, I 'whacked off' and I'm calm now. You know what? My opinion hasn't changed.

You're still a jackass.

Edited by NerfMonkey, 05 February 2006 - 10:39 PM.

  • 0
SexD Warves

#5 SolidiusSaint

SolidiusSaint

    Member

  • Banned
  • 31 posts
  • Location:Utah

Posted 05 February 2006 - 10:31 PM

Note NerfGRUMPY the other handle is removed how the hell will you hold it from the rocket! AND DON'T BITCH THATS WHY FORUMS ARE CREATED FOR PEOPLE TO GIVE OPINIONS thats why people post things in the first place to show people what they look like and what it is, then people reply back therefor causing a conversation. Why don't you go whack off then talk to me when your calm holy fuck. ;)
Only The Dead Have Seen The End Of War, We Have Never Known Of This But, Know This I Will Indeed Enjoy

#6 nerfer34

nerfer34

    Member

  • Members
  • 1,594 posts

Posted 05 February 2006 - 10:33 PM

I agree with nerfmonkey, I doubt the he wanted the gun for looks. And he made the gun about the same size as a lightnin blitz! Nice mod!
  • 0
<!--quoteo--><div class='quotetop'>QUOTE</div><div class='quotemain'><!--quotec-->God Damn it Groove, you stole my kill.<!--QuoteEnd--></div><!--QuoteEEnd-->-OMC

#7 SolidiusSaint

SolidiusSaint

    Member

  • Banned
  • 31 posts
  • Location:Utah

Posted 05 February 2006 - 10:35 PM

LIKE I SAID its a great idea, i agree the titan is a little to big to be running around with so I like how you lowered it down, but I stated my opinions already and got hacked on for it ;)

Edited by SolidiusSaint, 05 February 2006 - 10:35 PM.

Only The Dead Have Seen The End Of War, We Have Never Known Of This But, Know This I Will Indeed Enjoy

#8 LordoftheRing434

LordoftheRing434

    Member

  • Members
  • 565 posts
  • Location:Duluth/Minneapolis, MN

Posted 05 February 2006 - 11:15 PM

Renegade, I really like what you did with the monster. It's a lot more sleek. How did the RF20 tubing turn out for the pump? It seems like an effective way of connecting it.

Soldius - Cool it. The amount of posts you have made recently is about to suffice 1 or maybe even 2 weeks for me.

~Rings
  • 0
And when he gets to Heaven, to St. Peter he will tell, "One more soldier reporting sir, I've served my time in hell."

"I bluff it. I don't throw my weight around and say I know what I'm doing." ~ Mick Jagger

#9 ogopogo

ogopogo

    Member

  • Members
  • 108 posts
  • Location:portland oregon

Posted 05 February 2006 - 11:28 PM

Wow that is amazing that you could get it that small. Ita kinda like a huge pistol if you had a holser for that it would be very funny but not very usefull. Any way great reduction.
  • 0

#10 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,471 posts

Posted 05 February 2006 - 11:58 PM

I love the fact that the rocket is larger than the gun itself. You should bring that out to a pistols only war and start knocking kids over. Good work! How bad is the recoil?
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But Iím just not the angel you knew.

#11 BandAid

BandAid

    Member

  • Members
  • 2 posts

Posted 06 February 2006 - 02:28 AM

Nice mod Renegade. I just put my pump like yours but I didn't hack off the back of the gun because I like the stock. I just used the tubinng that went from the pump to the hornet, but mine leaks because I didn't use any glue :w00t: After I did it I was afraid of the pump hitting the rocket fins but it worked just fine. I'm very happy with the pump in front.

AND DON'T BITCH THATS WHY FORUMS ARE CREATED FOR PEOPLE TO GIVE OPINIONS


Forums are made for all sorts of reasons. This one is to share information on nerf modifications. This forum is not for you to rate other peoples mods. Your opinion helped no one.Your rating was not useful and no one really cares about it. your opinion without any suggestions is just a waste of space. You are not that important, and no one cares about your opinion.
  • 0

#12 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 06 February 2006 - 07:54 AM

As mentioned in my original post, the pump tube/pumping doesn't get in the way of fins or the handle, since it is spaced out an inch off of the gun. This has increased RoF for me, because of the ability to pump it like an at2k, and not push the large stock in and out. I didn't have the extra handle on the Titan to begin with, so I had to work with what I had.
  • 0

#13 ompa

ompa

    Introductinator

  • Moderators
  • 2,368 posts

Posted 06 February 2006 - 07:11 PM

I like it. Although I suggest steadying the pump with additional glue, maybe epoxy or plumber's goop, in addition to the tape. Trying to pump the gun, and having the pump fly back from overzealous pumping, and then having the tube break off the nipple is a very, very, bad experiance.

~ompa
  • 0

#14 SG Pilot

SG Pilot

    Member

  • Members
  • 281 posts
  • Location:Worcester, MA

Posted 07 February 2006 - 12:09 PM

*Sigh!* If only my parent didn't throw out my broken RF20 :rolleyes: That's awsome! B) I think I'd love to do that mod on mine myself... maybe.
Question: What is the Bic pen mod?

Edited by SG Pilot, 07 February 2006 - 12:13 PM.

  • 0
QUOTE(VACC @ Oct 9 2009, 04:45 AM) View Post

I know, I HATE toy guns that are made for little kids!


#15 Anima

Anima

    Member

  • Members
  • 92 posts
  • Location:Dayton, OH USA

Posted 07 February 2006 - 12:21 PM

I suggest finding a piece of PVC pipe, and use a bracket and screws to secure it to the gun...then slot the pump into it. More secure, the pump is protected, and it will look better. :rolleyes:
  • 0
On the web, your language skills are your appearance and odor. Don't be a smelly elephant man.

#16 Black Wrath

Black Wrath

    Member

  • Members
  • 1,071 posts
  • Location:Mississauga, ON, Canada

Posted 07 February 2006 - 02:44 PM

Question: What is the Bic pen mod?

The "Bic pen mod" is just a trigger pull modification. You cut a length of the pen and put it over the firing pin attached to your trigger. It reduces the travel length of the trigger because there is less pin to pull out before the air is released. The weight of the trigger changes a bit aswell.

It's really only for tank powered blasters.
  • 0
Xx_Black-Wrath_xX of The Canadian Foam Militia

Not in the game anymore, but it was great while it lasted. Thanks for the great years of fun, NH!
--
Resident "Spawn of Talio"

#17 NerfMonkey

NerfMonkey

    Member

  • Members
  • 1,820 posts
  • Location:Tucson, AZ
  • State:Arizona
  • Country:United States

Posted 07 February 2006 - 05:04 PM

*Sigh!* If only my parent didn't throw out my broken RF20 :rolleyes:

1/4" vinyl is almost the same as RF20 tubing, except a little bit stronger. That would fit perfectly so even without RF20 tubing you could still do the reduction.

I never said it but nice. It looks like a pistol. I'd add a very short barrel to make it pistol-round legal, just because it's so cool looking.
  • 0
SexD Warves

#18 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 13 February 2006 - 08:30 PM

I finished modding the barrel today. Has stock barrel, instered some 1'' PVC with a 1/2 coupler at the end to use a normal 1/2 barrel, a nested brass in PVC barrel, and fire the titan missle over the stock barrel. A member of this site has done this to his titan barrel, but I forgot who it was but they get credit for that part. Single barreled with stock micro dart tag darts in 1/2 PVC it shoots great. The 1'' PVC keeps it steady, but doesn't extend past the stock barrel. The pump tube has been super glued on, and I got rid of the temporary duct tape supporting it. I will be adding another handle to where the hornet handle was. As stated before, when I began this mod it was already gone. Search for Supermaxx G-36 to see the titan from back in March.
  • 0

#19 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 15 February 2006 - 09:01 PM

Double post, so what? I've got teh pics!

The gun is the same as mentioned above. Barrel in picture is brass scraps that I find in my couch. So far I've found 2 feet of brass from under my couch. How it gets there? Nobody knows.

Can shoot through a mountain dew can when fired from point blank ranges. My only use for it singled is for our dodgeball nighttime "eat shit-offs". Other wise I'd be using the missle/ arrow darts.

Posted Image

Posted Image
  • 0

#20 Falcon

Falcon

    Velcro'd Beanpole

  • Members
  • 1,375 posts
  • Location:Glendora, CA

Posted 15 February 2006 - 10:28 PM

If you want it to be legal at wars in general (not to mention useful) another alternative would be to do THIRST's quad-barreled shotgun barrel setup, or jakethesnake's 12-barrel shotgun setup (or something of the like...)

Just a thought...a four-barreled pistol shotgun with that kind of power. *sheesh*

Great job!

And holy shit that's a long barrel...where do you find retailers selling brass that long in one piece? Or is it not one piece? All I have access to are 10" tubes...
  • 0
----------||||||||)
QUOTE(Ilývatar @ 0000) View Post
Of the theme that I have declared to you, I will now that ye make in harmony together a Great Music.

#21 LordoftheRing434

LordoftheRing434

    Member

  • Members
  • 565 posts
  • Location:Duluth/Minneapolis, MN

Posted 15 February 2006 - 10:32 PM

Shite, that is amazing. You do have a considerably long barrel though. Does it maximize the gun's performance? I would hate to see that pointed at me.
  • 0
And when he gets to Heaven, to St. Peter he will tell, "One more soldier reporting sir, I've served my time in hell."

"I bluff it. I don't throw my weight around and say I know what I'm doing." ~ Mick Jagger

#22 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 16 February 2006 - 08:26 AM

The barrel is constructed of random brass segments It's almost all 17/32 nested in 9/16. That'd be like 5 feet of brass. :) The barrel looks alot longer in real life. I took the picture at an angle.

It seems to shoot better with the extra foot of 9/16 I slapped on there then without it. As mentioned, I would ONLY use it single barrel'd in the dodgeball wars in my backyard. Square fenced backyard with boxes and a few trees for cover. there's really no shooting within 50' since the center line that divides the area, is in the open. I think I will be making one of those 4 barreled attatchments though. I've got all the 1 1/4'' PVC and CPVC I need.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users