5162 replies to this topic

[roboman]

Well, now that NH is back up, I figured I'd post my latest work.


4 12" aluminum/PETG barrels, rearloading, aluminum pump head.


Rearloading slot details.


Singled, custom-turned delrin coupler, 12" aluminum/PETG barrel, will receive an aluminum pump head.


Male coupler detail.


Female coupler detail/aluminum plate to cover hole.


Internals.

[SonReeceSonJensen]

One more blaster painted skin color that you need to hold sideways.


I love the front basket, and I wanted as little shell cutting as possible so gangsta-style was the obvious choice. The wye is epoxied directly to the tank: I cannot think of a scenario where I would every not use a hopper.


A little fore/side grip action here.


Half a ½” PCV tee connector fits flawlessly after some sanding.


Seen here with a little reinforcement after I ripped it right off after one day’s use.

[Eik]

Zombie holdout pistol
Crowdizzle-inspired Eliminator paintjob

[taerKitty]

Glued-barrel NF, modded in under 30 minutes. (And another day for the goop and plastic pipe cement to dry.)

No need to boil it, etc. In fact, I make use of the fact that it's glued together.

[pjotrkuh]

Well for a P-J contest, I decided to re-paint my longshot, this is the third P-J for this shell, also it got a new type of breech wich works pretty well, although streamlines tend to fish-tail or curve out.

=

[SlightlySane813]

Haven't posted in a while so I'll show what I've been up to.



A stampede also soon to have a battery mod done to it.



Birthday present for a friend.



Double couplered of course.



A little surprise in the rear too.



For the win.



Current project in resurrection, it's past included being filled with about 4 pounds of wet sand and being buried alive.



Man you got to love Chainblazers.
2nd Chainblazer coming soon!

Sorry for blurry pics my phone isn't the best, and a shaky hand doesn't help ether.

[taerKitty]

Minimized NF with a front dart holder and taped gap. Yes, the tape won't survive if I open the blaster, but that's not the point. I just want to cover the opening.

[Nerfomania]

Been awhile...so......here ya go


Revised PumpSnap


BBBB Svt4b mk2 style with brass pop safety valve

And yes it needs that 18 inch cpvc hopper

Trusty Tbow witha new 16 inch 17/32nd slide breech


Tornado X2


Lightning blitz


BBUMB


Barricade and pango


Rork BBBB with MM tank


pistols





(ITS NOT DONE BEING PAINTED)

Sorry for the crappy Iphone photography! Questions? Send me a pm

Edited by _Nerfomania_, 23 April 2011 - 02:58 PM.

[c0rrupt10n]

AT3K With a CPVC coupler (Turret was cracked), and a bike pump replacement.

Money shot.

Things left to do: Buy copper for RSCB, fill in that massive hole with SOMETHING, and give it a paintjob.

[andtheherois]

New breech installed.

closed

open

removed the frontgun because it wasn't working. Didn't feel like doing the work on another DTB so I closed it up. Need to repaint it once it gets nicer in Jersey.

[Kid Flash]

A while back some kids from Australia posted an air compressor powered Nerf Titan. They wouldn't post internal pictures, and wanted 100 dollars to make one. I made this one for about 10 dollars... The titan was 4, the air compressor was 5, and the other little bits and pieces average out to a dollar (other than the plug. I stole that from a junky airsoft gun and will be taking the battery from it as well). Here's my take on it:

(Let it be known that the wires aren't soldered on to the switch yet... but you can see how it would work)

Edited by Kid Flash, 24 April 2011 - 01:53 AM.

[taerKitty]

It's a BrokenSVT Tank-Expanded SSPB (TESSPB), but I found an interesting carry method - by using the tank expansion hose as a ring, I can carry this pumped and ready, out of the way until I flip it into position.

===

For those who haven't seen his TESSPBs, here's a sample (but not the one he sent me)

The differences are that mine has a PVC tank instead of CPVC, and ended in a CPVC coupler, instead of the Sch. 80 barrel. It hits well over 90' with a 6" CPVC barrel. He's seen it hit 107'.

===

I liked it so much, I gave it a try myself:

The tank only looks bigger. It's actually 3/4" CPVC over 1/2" PVC. I like the more even tank look. Glue is still drying, so ranges are ... 0.

[SonReeceSonJensen]

Integration has never been my thing, but I just got a longstrike an would hate all the tact rails to go to waste.


So this fullfills my dual goals of 'one-more-shot' and diversified ammo.


Might be a little cocked, whatever. Taste my ringy wrath!

[Nerfomania]

SS2 had a busted tank when i bought it. So I replaced the internals with a BS tank, a blast button, and a minimized 2k pump.





Hits hard. Beware CFNF...

[NerfRogue83]

[Gears]

Chops and I are cool and productive.



Lessons learned? Titans make me think my face accidentally exploded. UMBs do not.

[LT DAN ICE CREAM]

Throws air like a Big Salvo tank.

Whatchu know about using a Hornet tank to fire through a hopper?

[NerfRogue83]

Ah, a clear veiw.......



Some more work done.....

[shmmee]

I added a raider handle and stock to my PAS. It's rock solid and very comfortable.





Precision cutting and pasting:



It still needs more putty, and a new paint job. I ripped the smdtb (spider man dart tag blaster) off of the shoulder last night, and hope to integrate it a little more cleanly by replacing the valve with a blast button, and hiding the pump - or a slightly better pump inside the collapsible stock (so compressing the stock pumps the smdtb). Once done the 3 blast barrels should sit flat on the side of the shell without the brick of tubing beneath it.

[KitAdrian]

Well, I have made significant advancements to the Kingslayer(MkII):

Note the expanded Hornet Tank. Waiting on the final seals to cure before testing, but it should be magical, as it's @ 10.5" of 1/2" pipe all told...



Also note the modified Cylinder Release Lever. This grip is so comfy, I tell you. The ring is made from 2 Nightfinder priming handles sandwiched together with epoxy and attached to the previous "Little Brudda Eastah Basket" handle, which has also been epoxy reinforced.



For any wondering how much the lever needs to be moved to affect the locking cam?
This Much:


In other words: Not much at all. With the ring in place, the lever is much easier to action than before, and it's easy as pie to do with just my middle finger, while all my other fingers stay right where they belong*.
Of course, the standard release button is there, though the bottom of it has been removed so it doesn't interfere with the lever.


I'm somewhat tempted to run an aluminum Slurpee straw through the 1/2" pipe to use as a pinhole sight, but it would reduce the air capacity of the expansion by @40-50%, and the slight downward angle would be great for arcing fire, but not so much at medium-short ranges.






_{*In your girlfriend.}

[Kid Flash]

Ever get that salvo tank?

Also,

[SonReeceSonJensen]

Got this in trade from TheDom21 at a March war, PJ is 100% him. I now added 17/32 and will be gifting it making it a 3-owner piece



A preview of my current project: sanding off all the digital camo is a total SOB.

[pjotrkuh]

I had my gold longstrike sitting around unfinshed for too long, the other week I decided to make it a true Steam-Punk prop:

The I.D.N.R (Inter Dimensional Node Rifle)


It comes with an T.D.D.U (Time Difference Detection Unit)

Edited by pjotrkuh, 07 May 2011 - 04:02 PM.

[taerKitty]

Using the barrel as an accessory rail. In this case, having a 'backup shot' that quite possibly outranges the dart being propelled through the barrel.

The barrel clip is a chunk of 3/4" PVC cut with ratcheting cutters, with the edges filed down. It's solvent-welded to the expansion tank of the TESSPB, and snapped to the barrel, so it's easily removable. It's underslung because that's the way gravity will orient it after some bouncing around on the field.

I may add a zip tie or string to secure it, but that's more belt-n-suspenders than anything else. The 240 degrees of PVC is plenty stable.

[SonReeceSonJensen]

Here is an Elim I got from VelveetAvenger almost 2 years ago. Finally got around to painting it.


Color scheme chosen by my wife, I think it looks like something The Joker would carry.