5162 replies to this topic

[dog green 1]

My favorite Nerf so far. Customised LS. Trade marks removed. Rear stock modified, barrel extension with suppressor and scope added. Several undercoats of metallic paint followed by a simple black with grey stripes finish. Punisher logo added and decals applied. Light weathering and a final coat of laqure.

Edited by dog green 1, 25 June 2014 - 11:11 AM.

[Cartaya]

Goes well right with the rest of my pistols.



Here is my New 14 Kg Nerf Rebelle "Messenger From Hell" that I worked on yesterday. Full mod details after the 27th since I am new here. Thanks Langley and Darkdragon for pointing me to the right thread.

--Cartaya

Edited by Cartaya, 26 June 2014 - 12:22 PM.

[Duke Wintermaul]

Fucking Dump! All the Stryfes have full re-wire, new switches, and 180 motors. The springers are 5kg mainspring, ar delete, and catch upgrade. The Titans are set up for 3/4in stefans. Everything but the Titans have rubberized grips, for the comfort.

Edited by Duke Wintermaul, 28 June 2014 - 03:16 PM.

[Trajarian]

Posting from a tablet, so apologies if I screw it up.

Sledgefire with Strongarm and Triad integrations. I call it "The Kraken".

Cherry red and gloss white alien skin paint job. All internal mods to all blasters. Lots of cosmetics.

Here's the link, can't seem to post pictures from this damn thing.

Imgur.com/account/lordtrajarian/images

Edited by Trajarian, 30 June 2014 - 02:56 PM.

[Green Wing]

Pump action Longshot with a front gun integration that has an 2K inside it. Has an improved angel breech, magnetized jamdoor, replaced plunger head,etc. Basically everything you can do to a Longshot. 2K has airflow mods done and fires off a key ring.

Video showing all the details and firing

[tbr]

[BuffNerd]

Angel Breeched Longshot with an integrated Powerbelle





Priming Indicator





Streamline Compatible



Flet on the underside of the Bolt like FA24 used to do



Push button on the side of the Powerbelle

[archangel24]

Last one for me to cannibalize for a while...

[Lord N]

This was my first ever Nerf blaster, my wife bought it for me. Little did she know...
Replaced the spring and the o-ring with Orangemodworks ones.
Removed the outer hull of the barrel, but then the seal would be non-existent because it actually relies on the screws holding everything together. So I thought I was smart by super glueing everything together. Which also glued the air restrictors tight. So I was forced to drill them out.
I'm still thinking of including some blinking LEDs, activated by a micro switch near the trigger.

[Nerfgirl36]

Modified maverick. Normal mods. Really good pj. Named Coeptis meaning new beginnings.
for sale

[Gunyboy007]

Here is "Sweet Justice"
Rampage has an OMW rampage kit in it. The triad has the vacuum holes drilled in the bottom, and the firefly is for cosmetics(the scope is holding the top of the firefly together).

[tbr]

What started as a clean and crisp blaster paint job quickly became a dirty and grimy blaster when the paint started to react and to put it politely "look sh!t". I did my best to recover the paint job and I'm actually pretty happy with how it turned out.




And when you turn off the lights, the glow-in-the-dark paint shines!

[rockinon96]

That rayven is pretty awesome

Here is a blaster I have been working on








Modifications I did so far are:

rear loading holes

rubber band to hold tank center

zip tie to hold turret mechanics in place

reinforcement on the orange side thingies

pump stroke increase

Modifications to be done to it are:

8 inch PETG barrels

3 Barrel Spacers

OPRV spring upgrade

Pump head reinforcement ( this one is because I didn't know the head was solvent welded to the pump shaft... probably going to achieve this by either adding brass to it, or some other material that is high strength and will fit snugly onto the pump shaft that connects the pump head.)

pump shaft reinforcement (will e-putty the space I the shaft's spaces to give more strength.

custom Paintjob will be done to it (by either me, or Drac...)

Note: the rear loading hole was achieved without a rotary tool... just a drill, small drill bit, a razor blade and sandpaper to smooth up the drill holes after I cut out the inside part carefully with a razor blade.

Note: the big bolt I added to the side shell decoration thingies is because I thought they were held in like the tabs on the Nerf Fire Strike (ELITE)... and soon found out they there solvent welded to the shell.

Note To Drac: If you decide to accept this request I sent you via email, The paints I want are gun metal base coat with your "fangar" red paint as a secondary.

And I would like the turret cleaned up a bit before you paint it, because I don't have a rotary tool (dremel) and it was done with a hacksaw to cut off the stock barrels, and the cut is a little uneven, I also made the holes for the rear loading on the turret with a file, and a steady hand

I also have prepped the blaster with some minor things to get ready to paint, all things related to the sticker(removed the sticker, got rid of any residue from the sticker with butter, and removed the butter/residue combination).

I don't have pictures of all the imperfections on hand, just the side decoration thingy, the way I did the rear loading hole, and the blaster itself. you will

Note to anyone on the staffing list: I will remove this and the note to Drac once he sees what I want done and responds to my email.

[Steampunkzombie]

My friend and I master keyed his RapidStrike using Coop's tutorial. We messed up and had to tape it so it didn't wobble.

[Nerf fett]

My first post and first project a Fallout style Jolt

[Nerf fett]

Second post second project, Raider with all the gun markings removed and basic internal mod (AR removal) may install a OMW massacre kit









My Firestrike







Just started a Hammershot smoothing out the grip , will maybe have a wood effect handle or go for an ivory look not decided yet but still a lot of sanding needed before paint



Thanks for looking

Edited by Nerf fett, 23 July 2014 - 07:06 PM.

[Nerf fett]

Finished the hammershot with cosmetic mods to the handle and front cylinder support removal, AR removed and spring pre compress with spacer

[thechase]

First blaster, first mod. Nothing too special here; ESky 180 motors, 2s Li-Pol which *just* fits in the stock battery compartment, 37 ammo drum, Vortex Nitron scope, 1mW laser diode in the front, 9 LED torch.

Paint turned out nothing like I wanted, the masking tape didn't stop line smudging so I ended up fading the white and black as best I could. I also discovered I'm pretty useless with a brush and oil paints as I couldn't remove the brush strokes on the scope. Overall I'm OK with it considering I've never really painted anything before - but I sure gained a lot of respect for people who can do this kind of thing well!

Edited by thechase, 01 August 2014 - 03:44 PM.

[UrbanIso]

The Pantherstrike:





Mod details here.

[Duke Wintermaul]

I did a thing, and I don't know why.

Edited by Duke Wintermaul, 05 August 2014 - 01:18 PM.

[JayHawk2475]

My custom Nerf roughcut!

http://http:t.co/Ewe95Sr5yM

Edited by JayHawk2475, 06 August 2014 - 09:10 AM.

[Tyeleo]

I call it Frankenrifle. Slight variations on Gas Mask Guys' Pump action recon mod

[Aeromech]

Please ignore the messiness of my den/workshop/sex dungeon. Stampede is double-volted with alkaline batteries, and has a slightly shortened BBB spring inside. Trigger is hooked up to one of the brake handles. Sledgefire pistol sits on the other side.

It could look cleaner but that would involve drilling into my fucking bike.

Video up tomorrow.

Edited by Aeromech, 07 August 2014 - 10:46 PM.

[ahtanie]

Modified Clear Raider w/ Air Tech 3000 and 9/16s Brass Breech

[SlightlySane813]

Raider shells and air tanks are amazing and shoot crazy far.



Two 4B Raiders and a singled breached 3k.

Edited by SlightlySane813, 15 August 2014 - 09:16 PM.