5162 replies to this topic

[BritNerfMogul]

Current WIP - Internal RSCB Buzzbee Hunter.



Reloads through the original bolt:


MONEY SHOT!

[makeitgo]

HyperMaxx 1500 - Overhauled Hyperfire DTB + SuperMaxx1500.

[ahtanie]

Nitefinder:


Octoshot:


WIP:

[psychoswan]

This is my LS with its shotgun foregrip




I made a bayonet for HVZ out of part of a recon barrel and an old arrow


Removable

I wanted my LS to be as versatile as possible so i added the Tac Rail



So i can add my spiderman shotgun attachment


Or a forward handle


With all its accessorizes

[thedom21]

Hoppered reactor, same set up as a HAMP.




Ranges are 65-75 with very loose darts. I will get more accurate ranges later.

[ahtanie]

My knock-off Supertech 9000!






It's over 9000!!
And what's inside? A massive tank alright.

Edited by ahtanie, 18 July 2011 - 02:39 AM.

[Dayko]

It's been a long while since I posted in here.

Here is my most recent PJ:

Full Orange Mod Works internals as soon as I get my stage 2 kit.
Paint job inspired from OMW home page on the website and I added some personal touches to it.

[RedShot]

Hey
ahtanie

Nice supermaxx 5000, mind if I use your stock idea?

Here is mine for now, still need paintjob and some cosmetic work as well as a bolt handle (cant decide how I want to do it).








My newly revived 2k, it lives again!



Rear loading hole:

Edited by RedShot, 18 July 2011 - 08:29 PM.

[ahtanie]

Hey RedShot, sure! Go ahead
My next WIP:

[psychoswan]

My SSPB Derringer stole the idea from somebody else.


My sidearm, No that isnt a TechTarget that is the $2.50 knockoff from target
I dunno if i lucked out or what. Cause the seal is perfect and with an added spring, win.



My Quadshot. The MF1. Roseart Barrels, turret seal improvement.


Cut down toy shotgun shells as ammo holders. Will be painted to be less threatening.


Anyone who can identify where this symbol comes from is awesome.

Edited by psychoswan, 19 July 2011 - 03:27 PM.

[landstricker]

Here are a few guns I I've been working on:



Quadshot: PETG barrels, Zorn's plunger draw increase, PAS and Longshot spring replacement. Still tweaking it.
Nitefinder: Pvc couplered, [k26] spring replacement, draw increase, minimization.
Wipeout blaster: Cpvc couplered. Might add a ace 199 spring.
4B: Pvc couplered it and added a wye.

[36thShadowBattalion]

Angel breeched longshot with arctic digital camo

[Gears]

sup, pistol splat

[SlightlySane813]

Nice banner Gears, a lot better than the little black board.

A couple wip's

A 2k with 3k brains.



And a goo gage look into the future.



and speaking of new brains, here's a sneakpeek of my sharpshot.

[durka durka]

Finished this awhile ago.




Plunger draw increase, industrial spring, two o-rings,SSBP integration, RSCB (holds 4-5 stefans), and a few other small tweaks. I even relocated the pistol grip so that it is more comfortable to hold and easier to holster. However, It's somewhat more awkward to prime now.

You might have noticed the sight on the end of the barrel. It actually does improve accuracy and makes aiming easier and faster.

Simply look down the RSCB and put your target in the circle. I haven't done extensive tests, but I've only seen an improvement in accuracy. My most powerful sidearm as of now.

[roboman]

Just about finished up Lucian's 2K.
It has:

• Aluminum/PETG speedloader
• Aluminum Goo Gauge replacement
• Aluminum pump head
• Aluminum pump tube shroud
• Aluminum/delrin female coupler

Paintjob courtesy of Baghead.

Soon, it will be receiving an aluminum valve, as well. He needed this in time for Apoc, though, so it just has a stock tank for now.

8/2/11 EDIT: I shipped him the aluminum tank today, it should be arriving the day before Apoc.



I'm willing to contract all of this or even just parts of it. PM me for info.

Edited by roboman, 02 August 2011 - 11:35 PM.

[ilikefish58]

Props to Zack the Mack, obviously.


Sorry for the blurry pic. 6" 17/32 brass barrels


Small piece of [k26]



It still fires one barrel at a time! Sometimes....

[RedShot]

Thanks,
ahtanie
Here is my rendition with the stock!





Dr. Red himself, approves!



Just all I have to do now is get a bolt on the breach, paint it, and make a writeup if you guys would like! I took a ton of pics and video!

Edited by RedShot, 23 July 2011 - 09:18 PM.

[SonReeceSonJensen]

Aaaaannnnd....



BAM!!!

[nisaburo]

Gave my RFSG K-9 special a little upgrade.

Old and busted


New hotness


wood grip, little changes to the shell and a PCV homemade pump handle. Was starting to look a little too real for my liking so it got a nice splash of paint too.

[Roger Explosion]

Now for an abomination





Singled RFR and NF crudely intergrated. Both guns hit 60ft

[tylertheuncreator]

My Stampede is finished!!!!!!!!!!
-AR removal
-triple springed
-lubed up
-voltage increase(20v)
-improved air seal

It hits around 50'-60' when fired fro shoulder height (my shoulder height, I'm 6'2"). Overall it makes good secondary when compared to my singled bbb, or my brass-breached, double-springed ls.





Sorry for the camo, I was too lazy to do a non-spray-paint paint-job.

Edited by tylertheuncreator, 26 July 2011 - 05:43 PM.

[psychoswan]

My proof of concept for an integration. I just got the Rattler and adding it to the bottom of my 3b just made sense to me


The Rattler barrels are slightly aimed up, I couldn't get it quite straight without permanent modification. But i think this makes more sense
because when firing the Rattler I'm normally firing from the hip rather then from my shoulder like the 3b so a slight up turn is actually helpful.

The "sight" and stock are actually stopped from rotating by the hooks for the sling. Again allows it to be modified while not being permanent.

And my rscb BB. First time using one decided to try it out. Plan on making the hopper closer to flush with some body modifications.

Also plan on integrating my 2k thing with a supersoaker pump into the front somewhere

Edited by psychoswan, 27 July 2011 - 01:31 PM.

[diamondbacknf1626]

^lol hopper clip^

Also, I don't think that I ever posted this:

I was browsing my photobucket and stumbled across it. That pic is of a rear-loading AT2k that I made pre-fire that was intended to be part of a commission swap with Rogue. Obviously that never went down, but the blaster was pretty sweet, and to my knowledge, was actually the first rearloading AT2k ever made. It was made after Ryan's rearloading AT2k turret, but was the first actually made with intent to still work with the 2k.

[bennorco]

Added a stock adjustment to my longshot and I'm using the lsfg for making it pump action. (I know, I screwed up the cut on the lsfg)

Edited by bennorco, 27 July 2011 - 02:22 PM.