Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#3701 Cabbage

Cabbage

    Member

  • Members
  • 10 posts

Posted 25 June 2011 - 03:32 PM

Posted Image

Meh sn*pe blast.

Edited by Cabbage, 27 June 2011 - 10:09 AM.

  • 0

So I can't say if the epoxy would hold for 100 cocks or 10.


Britnerf Forum!

#3702 joeri

joeri

    Member

  • Members
  • 34 posts

Posted 26 June 2011 - 01:25 PM

Modded recon, Shoots like 35 ft.
Posted Image
Posted Image
Posted Image
Posted Image
Waiting for OMW kit...
  • 0

#3703 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 26 June 2011 - 03:36 PM

Posted Image

Posted Image

My LS just got Slugged....

Stock LS + CS PA grip. Just need to rubberize the grip to make priming easier.
  • 0

#3704 jakejagan

jakejagan

    Member

  • Members
  • 209 posts

Posted 28 June 2011 - 06:23 PM

2008 meets 2011:
Posted Image
Posted Image
Oooooooh, what's inside?
Posted Image
A 3k tank fits perfectly with just a little bit of trimming
Posted Image
Posted Image
Key ring connector material: Headphones wat?
Posted Image
Stickers are nice too

Edited by jakejagan, 28 June 2011 - 06:52 PM.

  • 0
00:38 jakejagan I hear you guys still bring up the "gangsta shot"
00:38 Bags it is legend now

17:45 *** MrPzowned was kicked by Zorn (MrPzowned)
17:45 Zorn moral of the story: don't pick on idle mods yo

#3705 Amp

Amp

    Member

  • Members
  • 42 posts

Posted 28 June 2011 - 09:38 PM

Posted Image

Edit By VACC: Really, this was hard? The hosting site you use gives you the fucking code. Just copy and paste it.
  • 0

#3706 Amp

Amp

    Member

  • Members
  • 42 posts

Posted 29 June 2011 - 12:57 PM

Posted Image

Sorry VACC didn't know what code, I was trying different ones. Still not sure.

Edited by Amp, 29 June 2011 - 07:23 PM.

  • 0

#3707 crow dizzle

crow dizzle

    Member

  • Members
  • 6 posts

Posted 29 June 2011 - 07:45 PM

Recent:

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

Done while waiting a year+ for validation:

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

Dalilah
Posted Image
Posted Image
  • 0

#3708 AbstractSociety

AbstractSociety

    Member

  • Members
  • 108 posts

Posted 30 June 2011 - 09:26 PM

My first "serious mod" rebarrel of the Tech Target.

Posted Image
IMAG0001.jpg by lebron_basketball, on Flickr

Quick question. Theres about 3 and a half inches of the PPVC sticking out. Is that too much? Is there an "optimized" barrel length?

and no I'm not Trevor.

Edited by AbstractSociety, 30 June 2011 - 09:26 PM.

  • 0

#3709 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 01 July 2011 - 12:09 AM

Well, I did two more singled 2Ks, this time as commissions for Baghead.

Posted Image
The twins.

Posted Image
I ran out of delrin while doing the second coupler, so I used aluminum. I put a delrin collar around the front to provide some contrast with the metal.

Posted Image
One of the 2Ks had been previously modded, so it didn't have the plastic collar at the front of the pump housing. Of course, I had to do something about that, so I machined an aluminum replacement.

Posted Image
The stock plastic hose barb broke off of the pump on this one, so I made a new one out of some 1/4" brass I had laying around.

Posted Image
Here, you can see the aluminum plates that I used to cover the hole created by the absence of a turret.

If anyone wants one, I'm charging $25 for parts and labor, if you supply the gun itself. If you don't, I'll add on however much a new-ish 2K ends up costing me. PM me here on the 'Haven or talk to me on #nerfchat, if you're interested.
  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#3710 father time

father time

    Member

  • Members
  • 170 posts

Posted 01 July 2011 - 03:52 PM

My sort of SVTed 4B:
Posted Image
Has Schwinn bike pump, removable shoulder stock, RSCB
Posted Image
Still has original OPV, and 2 triple strike tanks on the sides
Uses SMDTG trigger at my thumb
Posted Image
Picture from the business end
Posted Image

Edited by father time, 02 July 2011 - 02:38 AM.

  • 0
Ask her if she wants you to give her a multiple orgasm.
And when she looks stunned show her a picture of the blaster.
But if she gets excited. You're in.
-Miguel Ramos
Time is the one thing you can never escape.-Father Time

#3711 ChaosPropel

ChaosPropel

    Member

  • Members
  • 586 posts

Posted 02 July 2011 - 08:21 PM

First post in this thread, but not first mods. :P

Here's a 3k I just finished up overhauling: 12" PETG barrels, Hornet pump replacement, rear-loading, replaced tubing (going straight from pump to tank), glued trigger pin; the works. I had to deal with a few leaks, which is why this took a couple weeks to finish, in addition to being because I wanted to get everything PERFECTO, which I think I almost did.
Please exscuse the crappy phone pics.
Posted Image

Here's a view of the rear-loading slot; very clean, if I do say so myself.
Posted Image

I didn't like the look of having no goo gauge, but I couldn't find a way to put the emptied, disconnected gauge back in the shell, so I did my tubing in such a way so that the tubing connector (quick-slip connect), could fit right inside the goo gauge slot (no shell mods required! fits perfectly!) I like it a lot.
Posted Image

Instead of using a Mr.Mcnumbers barrel spacer, I made my own using his templates and 1.5/16" Home Depot polycarb. Pretty nice.
Posted Image


This thing is seriously overpowered. At about 6-10', and 4 pumps(plugged hornet pump), it puts copperBB domes through cardboard. @ 5 pumps, dome darts usually go through both sides of a nerf AT box, and slugs go through on side. It's Effeminate.

Thanks to Landstricker for the 3k. :)

Edited by ChaosPropel, 02 July 2011 - 08:35 PM.

  • 0
Preheat oven to 350 degrees F (175 degrees C).

#3712 makeitgo

makeitgo

    Member

  • Members
  • 216 posts

Posted 03 July 2011 - 04:37 AM

Sorry, no PJ or cosmetic mod for this. My Quadshot is usually my Ginny Pig for my Octo. I wanted to see if I could create an inlined clip for my Octo by first testing it out on my Quad. It worked! 12 rounds in total for this Quad. With just the 16kg spring, it gets 90' flat going down to 80' flat by the 3rd round in each clip. Converting it to an inlined clip system brought the range down by 20'. I was getting 110' flat before. I figured 80' - 90' was acceptable.

Posted Image

Expect an inlined Octo soon! 24 rounds of awesomeness. With the man spring, ranges should be around 110' flat, going down to 100' flat.
  • 0
"...he is one speedy bastard." ~ Cheyner

#3713 Merzlin

Merzlin

    Member

  • Members
  • 589 posts

Posted 04 July 2011 - 01:56 PM

While I was reading "Outliers", I decided to modify a Big Blast with some spare parts that I have.

Posted Image

Shoots way too hard and way too far
  • 0

#3714 Amp

Amp

    Member

  • Members
  • 42 posts

Posted 05 July 2011 - 04:17 PM

Posted ImagePosted ImageNew Longshot soon to be cpvc breeched
  • 0

#3715 Merzlin

Merzlin

    Member

  • Members
  • 589 posts

Posted 05 July 2011 - 07:16 PM

My trigger kind of snapped in half; I decided, instead of leaving it a worthless-small-animal-killer, to make it a functional-small-animal-killer.

Posted Image
Posted Image

On another note, do you want a FREE, painted, Nerf Crossbow shell? If you do, CLICK ME!
  • 0

#3716 psychoswan

psychoswan

    Member

  • Members
  • 57 posts

Posted 05 July 2011 - 10:33 PM

Hello Nerfers.
My longshot with added hornet stock. It makes it long enough so it fits into my shoulder nicely.
And i like the looks

Posted Image

Closeup

Posted Image


And a little sneak peak of my childhood memories that is my next project

Posted Image
  • 0
INCONCEIVABLE!

#3717 TantumBull

TantumBull

    Member

  • Moderators
  • 1,929 posts

Posted 07 July 2011 - 03:48 PM

Super duper minimized NF. Should holster comfortably.
Posted Image
  • 0

#3718 pSyk

pSyk

    Member

  • Members
  • 76 posts

Posted 08 July 2011 - 01:29 AM

Alright here's my modified and overhauled Nerf Sawtooth:
Posted Image

and for those who will understand (I'm not explaning lol):
Posted Image
Posted Image
Posted Image

Credits go to
mystefansdontflystraight
Frost Vectron
Dizzy Duck

:)
  • 0
Damn you, Screw!

#3719 Jtest

Jtest

    Member

  • Members
  • 24 posts

Posted 08 July 2011 - 11:40 AM

For starters psyk that is pretty freaking awesome!

Here is a WIP, I took over the job of "weapon master" for a post apocalyptic larp here in TX/OK that uses nerf for gun/bow combat. I wanted to start working on their longshots and felt the abuse these things see made an integration unlikely, so will shotgun them. Since these aren't my guns and I have several to mod I needed something cheap yet functional.

So here is what I did with a dremel and a hairdryer. Total part cost was under $5
Posted Image
Posted Image
Posted Image
  • 0

#3720 Spud Spudoni

Spud Spudoni

    Member

  • Members
  • 321 posts

Posted 08 July 2011 - 02:37 PM

My latest WIP
Kickin' it OldSchool
Posted Image
Man this thing truely is vintage! It's like the third Super Soaker ever made.
  • 0

industrial designer


#3721 socal

socal

    Member

  • Members
  • 30 posts

Posted 09 July 2011 - 08:06 PM

Just thought i would show you guys my finished nightfinder

mods done
minimized
PVC coupler
painted
ACE #49 spring
longer draw
ammo holders in the handle
(all the basics)
Posted Image
(sorry for the bad pics I don't have a good camera)
Posted Imaged
Posted Image
  • 0

#3722 makeitgo

makeitgo

    Member

  • Members
  • 216 posts

Posted 10 July 2011 - 07:53 PM

Nice cosmetic work on the shotgun, Jtest! I must copy.
Posted Image
... just an Angel Breech for now.

Just A fun mod. Marshmallow crossbow that shoots multiple types of ammo. Simple coupler mod.

Posted Image

Yes. It can still shoot large marshmallows.

Edited by makeitgo, 10 July 2011 - 10:11 PM.

  • 0
"...he is one speedy bastard." ~ Cheyner

#3723 Jtest

Jtest

    Member

  • Members
  • 24 posts

Posted 11 July 2011 - 11:46 AM

I had several people ask me for additional details on the shotgun mod. So I tried to capture some pics on this one.

Start by cutting out the notches in your 2" thinwall pvc. Note this is a starting point, I smooth and sand the edges to fit.
Posted Image

You should have something like this after cutting your PVC
Posted Image

Now after you trim down the bi-pod nubs pull apart the pvc and slip it on the longshot.
Posted Image

At this point I heated the PVC with my wife's uber hairdryer. After it cooled it was naturally spread out, so it was not "clamped" onto the blaster, but fit loosely.

Posted Image
Add your 1/2 cpvc arms, with your glue/goop of preference.

And use cpvc elbows to raise it up enough to the "bolt hole"

add some foam for grip
Posted Image

and there we go.
  • 0

#3724 makeitgo

makeitgo

    Member

  • Members
  • 216 posts

Posted 11 July 2011 - 10:32 PM

Trying to make the xShot Stealth a little more worthy.

You've all seen this neglected blaster.

~before
Posted Image
Posted Image
~inside and out.

After I made it go!

The outside:
Posted Image
Posted Image

The inside:
Posted Image
Posted Image

...wait a minute. What's that?
Posted Image
Posted Image

That's right! I've modded the stock nozzle into a CPVC couplered attachment.

The second barrel can shoot darts and/or water. Both get high 70's, low 80' flat.
With the water nozzle, it only shoots 25' but it's a continuous pressurized stream not a 'squirt'.

This is what the xShot Series should have been all along. Full write up coming soon.
  • 0
"...he is one speedy bastard." ~ Cheyner

#3725 taerKitty

taerKitty

    Member

  • Members
  • 883 posts

Posted 11 July 2011 - 11:17 PM

Posted Image


Atomic Blaster + Splat + Ace #199 spring.
  • 0
Fugly is a feature.


3 user(s) are reading this topic

0 members, 3 guests, 0 anonymous users