5162 replies to this topic

[xtremejumpy]

Here she is. The only other Raider PJ I've SEEN except for Ice's. Don't say "Oh, yeah, well I painted my raider a while ago" You never posted it. Or I just never saw it

Paint


For the zombies war, and my logo


back of the drum


Right in the face


Smiley in gun


without stock

[b00m13]

/

Edited by b00m13, 09 October 2009 - 02:24 AM.

[Lucian]

It was a fun gun, while the titan still had a rubber washer in the front...

[Ebox]

Meant to be

[RVMVTVProductions]

I used this recently after a bunch of cleaning up and some slight refining. Now, normally, during blaster-construction/modification, I would finish up a NF, buy some more glue and slap in on, but frankly, my parents are controlling my costs and overhauling usually ends up in failure for me. Though slapping an NF under this isn't exactly that, adding a 2k on the side like Dayko (I think) did would, especially getting it to stay on.

Explanation aside, I am usually conservative with my useful blasters, like my Eliminator, Crossfire, Pistol Splat, and Nite Finders.

[/ big block of text]

I stole the window shot. Yay for me!

Bad photo first.

Edited by RVMVTVProductions, 28 September 2009 - 10:09 PM.

[ArsenicAnarchy]

Dammit Jumpy. I was going to post this yesterday but I felt the need to do touch ups. Well 2nd isn't that bad.

Presenting Dixie:

Edited by ArsenicAnarchy, 29 September 2009 - 06:25 PM.

[hola]

My newly painted rapid fire rifle.



Here it is at a different angle.

[Ryan201821]

Doooooooooooooooooooooooooooooooooooooooooooooooooooomsayer!!!11!!





Awaiting a troll scope, and care bear for the center piece of the turret.

Edited by Ryan201821, 01 October 2009 - 01:41 AM.

[Seven7h Man]

Green At2k With sanded PETG turret, barrel spacers and ramrod holder.

[Gears]

[melbourneSTORM4eva]

"Oh very nice!"

Edited by melbourneSTORM4eva, 03 October 2009 - 09:59 AM.

[Ice Nine]

Four inch aluminum barrels, eventually going to get spacered. Shoots like a motherfucker.





Two Nite Finders for differing rulesets in pistol rounds. G7NF is +bow springed and increased draw for retarded range, G1NF is stock springed and normal draw for sub-sixty five foot ranges, but just barely.

[Ryan201821]

When awesome modders meet, we get shit done.

Here's the stuff I did last night.

Rear-loading 1500. Works incredibly well. The new seal is much better than the seal on the stock turret.



Zeke's new +bow. The purple tape really brings it together.



Failed Manta. I put so much work into this stupid thing all so it could break 5 minutes after I completed it. Whatever, I'll still use it with the ghetto duct tape.



Ice Nine was also very productive.

Assorted collection NF's



Beast LB



Maxshot. This was actually mine I bought from OMC a few weeks back. I just glued on half a CPVC coupler on the end of the plunger tube. Zeke put it all back together. It fires very well.



Pretty purple and red LpL



Fuckin' mess





Zorn wasn't productive it seemed.

But at the last minute (3:30 this morning), Zorn got his shit together.



It's a PAS with a scout's handle and soon to be firefly stock. Oh and a stefan compatible Raider mag.

You guys are all fucked.

[SonReeceSonJensen]

My sidearm during Defend The Core rounds. Yes: sidearm.


First barrel takes out the defender, next three rack up the points. Keep a pocked full of additional barrel pods for further volleys.


Write up somewhere in the forums.

[Vinnie D]

I updated the Hydra and have dubbed it the NeoHydra. it now features a 4 shot RSCB, improvements to the pump grip for the SSPB fixing some misfiring problems with said SSPB, a few cosmetic fixes, and adding a flashlight to that big chunk of dead space between the main and NF barrels.

[death by cheez]

The Raider TS-35 (TS=Tactical Shotgun)
PS I really hate Imageshack.

[TantumBull]

4B updates:

[Collective]

Just finished my Titan pump relocation:



To solve the problem of how to keep the pump from coming out of its tube, I cut off all but the back inch and a half of the pump piston and JB Welded some 1/2" cpvc into it. Then I puttied a 3/4" cpvc end cap with a 5/8" hole drilled into it onto the end of the pump tube. The cpvc goes through the hole in the end cap, but the pump head cannot, so problem solved!

The rscb is pretty straight forward. It holds seven darts.

Edited by Collective, 04 October 2009 - 09:28 PM.

[ahtanie]

My modified supermaxx750

[Cappy]

Heres some of my guns. Mega missile, Expand A Blast, Singled Mav, Titan, AT3K and sm750.

]http://s969.photobucket.com/albums/ae174/cappy5738/?action=view&current=DSC_0113.jpg

http://s969.photobuc...nt=DSC_0122.jpg

http://s969.photobuc...nt=DSC_0116.jpg

http://s969.photobuc...nt=DSC_0117.jpg

http://s969.photobuc...nt=DSC_0120.jpg

http://s969.photobuc...nt=DSC_0013.jpg

[cheerios]

Cappy please change the links to pictures instead.



One of my work in progresses.



My CPVC AT2k turret.




My Singled LS, I did this after my boltsled snapped and I didn't feel like fixing it or buying a new boltsled.

[atomatron]

Before:


After:




...no, it is NOT Michael Jordan themed...I just had that #23 decal lying around and it happened to be red.

[Reconman24]

Edited by Reconman24, 06 October 2009 - 08:40 PM.

[hola]

Here is my singled magstrike, and my at2k integrated rfr.

[lazer371]

unvailing my newest ls currently witth a ls and a 2nd gen nite finder spring in it, with a half ass paint job(I like it though...)

Edited by lazer371, 07 October 2009 - 06:15 AM.