5162 replies to this topic

[nerfispwnage243]

Here is my latest project... Well one side of it at least.

It's my cosmetically improved longshot!

Here is another view


Closeup on the details


I finished this one last week but I have been too lazy to post it.

It's my version of the Big Bad Blaster (credit to ejrasmussen for coming up with it thanks dude!)
The BBB part averages 80-90 WITH TAGGERS becauce I have no stefans at my disposal. The DTG part is brassed and averages 50-60 ALSO WITH TAGGERS.

Another view

I might do a writeup for it, depends if I have time.

Enjoy!

[TED]

Nerfispwnage your long shot looks fucking terrible.

[Ryan201821]

Here is my new Crossbow painted by Direct Threat.

[ice]

I;m not sure why I haven't posted here before. This is about half my load, don't have pics for the others... yet.


The paint job is actually quite nice, just bad lighting. Here's a better pic of the paint.



Family of clipped guns, excluding 2.


Latest LS. I have a brass breech waiting to go in it, just having trouble getting the brass to bond with the plastic nub connecting to the bolt sled (I know I need fishing glue, I'm looking for it).


The internals aren;t in the LS in this pic, but the DTB works.


1/2 cpvc BBB (barrel detaches).



I also have some night finders, a titan, a firefly, pump action shotgun, etc.

[Magic]

My modified BBB, ARs removed, double spring. Camo paintjob. Shaved off the internal barrel, gets roughly 55 ft. with stefan, with external barrel 110 ft. flat, 130 angled.

Edited by NerfOnFier, 24 May 2008 - 08:42 AM.

[oodalumps]

My attempts to make a sidearm better than my tri-barrel SS1. The SM350 will probably make for a great rushing gun.

[kossaxx]

Recon CS 6 done in the theme of a Space Marine Bolter with battle damage

[A side of nerf]

These are my favorite guns from my collection.

CPVC barrel replaced Dart Tags.


CPVC barrel replaced with a 1/2in. SCH 20 sheath, Air Tech 1000.


CPVC barrel replaced Tech Target.


Nitefinder Crossbow.


The Nitefinder crossbow has a detachable stock.

[Shanks McLoin]

My Disc Shot. I Crayola'd it, but to no effect. Must've effed up somehow:

Other side:

[Twitch]

Another BBB.

The black on the grip and foregrip is Plasti-Dip, not vinyl dye. The red has has a top coat of reflective paint; the first two images show how the blaster appears in normal light.



These images show more or less how the blaster appears when exposed to bright, direct light. (such as from the flash of a camera, light from a multi-LED flashlight, or the sun, on a clear day (when viewed from the right angle.)

[trogdor65]

This is my 2k that I made a new shell for, keyring serves as the trigger. The gun only fires from the bottom barrel the top is just for shown. I went for a basic "clean" look.

[smeagolsaur]

Found this pic in a Canadian Airsoft forum:

[Pebbles]

A couple of my mods. None of them are anything new, except my half-coupler NF.


A closeup on a different half-coupler.


Reactor's paintjob.


Lite Tek (buzzbee) "turreted" with part of an old Mav's turret.


Closeup on my painted NF. Just CPVC barrel, no coupler.


The Nerf logo, same gun.


Full view, same gun. It was inspired by the "battle damage" paintjobs here.


BBB, with duct tape holder for extra Mav turret.


BnA, painted and coupler modded for a friend.


Closeup on the Nerf logo. There's crackle all over the gun, I was a little excited with clearcoat.


Crossfire, with a partial new barrel.


Overall pic on that BnA.


My arrowstrike. With a long barrel, not shown, it can get 40 feet.


TTG paintjob for a friend. Krylon Fusion Blue with some white paint accents, and a mist of white on top.


Same paintjob.


My singled reactor. CPVC barrel, AR removed, lubed, painted as shown above.

Pebbles

Edited by Pebbles, 02 June 2008 - 02:08 PM.

[Shanks McLoin]

My Black with Silver and Silver with Black Crossfires:

For detail:


On the silver slide crossfire I screwed up a cut on the barrel and had to improvise a new one:

[Twitch]

My 2nd Rapid-Fire Rifle
The black on the grip, pump, and the very butt of the stock are Plasti-Dip. The red on the body, and the black elsewhere are vinyl dye.

[Foam Shooter]

Max Shot

Mods: 17/32" brass in PVC coupler with 9/16" brass in PVC barrel.



Disk Shot Pistol

Mods: 9/16" brass inside of PVC. Handyman spring and reinforced catch, cut down.


Big Bad Bow

Mods: CPVC coupler with fore grip replaced and front sight removed.

Magstrike

Mods: Air restrictors removed, Over pressure release valve "fixed".


Air Tech 4000

Mods: CPVC coupler, pump plugged


Big(gest) Salvo)

Mods: CPVC couplers with Bigger salvo barrels.


Nite Finder

Mods: Clean CPVC coupler with mini bungee.



Maverick

Mods: Air restrictors removed, painted.


Air Tech 1000

Mods: CPVC barrels.


Big Blast

Mods: Air restrictors removed, pump plugged, cut down.



SM750

Mods: CPVC coupler, pump plugged.


Dart Tag Gun

Mods: Air restrictors removed, handle cut-off.



Max Shot

Mods:Air restrictors removed, plastic cut off to allow use of my homemade rockets.

Edited by Foam_Shooter, 05 June 2008 - 05:04 PM.

[bogboogalars]

My new super 4b and before you say anything it's practical where I nerf so lay off.


So what do yall think?

[TED]

So what do yall think?

It's missing some important features Scope, collapsible stock, flashlight, laser sight, and a black paintjob.

[bogboogalars]

I realize that was sarcasim but it does need a stock...

[NerfCrazy]

This is my tropical magstrike

[g-force]

This is my tropical magstrike

I want that. The toucan is my favorite part. now just add a voicebox so it will make jungle noises. Futureseal and I joked about painting a PASG to look like a duck and putting a voice box in it to make quack everytime you pump it. And maybe give the duck a mohawk.

[Ubermensch]

That is hilarious! I bet the toucan totally makes it fire like 50+ farther!

[NerfCrazy]

My cousin paid me to make this for him. We are going to give it an awesome paint job today and it has a brass breach. NEW paint job. Try to
imagine metallic blue(all sparkly) and half of the back part of the gun black and this is no ordinary black it is a chalkboard!

Edited by NerfCrazy, 09 June 2008 - 11:30 PM.

[Banshee]

These are a few of my more prize guns. I do all my paint jobs very similar usually all in flat colors.

This is my modded Longshot, it has the AR removed, a 12 shot clip mod, and a smoother barrel replacement for the dorky gun on the front. Angled, i only get about 50' out of this thing.



This is my Nightfinder, I put in a micro laser pointer to replace the light and it still runs off the 2 AA's and trigger activated (very cool!), simple AR mod as well. Ranges are about 60' angled.



This is my Airtech 2000 with 8 inch barrels on it. I have a forgrip added and and a nice paint job to boot. Not only does it look totally awesome, it gets ranges up to about 135+ feet with stefans!



Last but not least, this is my clip modded Maverick. Its got a flat black paintjob, and AR mod. It gets about 45' max. Great sidearm for indoor battles!



P.S. Sorry about the Huge pictures, I don't remember how to resize them with out using paint. Haha.

Edited by Banshee, 08 June 2008 - 08:36 PM.

[Retiate]

My newest addition:

Supermaxx 1500 turret with 8" heavy wall PETG barrels.

The paint is a metallic black with brown spirals topped with a gloss clear coat.


Made to match:

Edited by Retiate, 09 June 2008 - 12:11 AM.