5162 replies to this topic

[J cobbers]

This thread is for sharing pictures of your finished mods and guns in progress. The idea is to provide a gallary to show examples of various modded guns. Please keep comments on the pictures posted to a minimum, or don't comment. If you want to explain the picture please do so.

I'll start with an example of my own:


This is my personal Night finder. It has a cpvc barrel and extra dart holders. The plunger is epoxy'ed back on because it broke off. The shroud over the barrel is 1'' PVC with holes drilled to look all cool and show the craft foam in the space between the barrel and the shroud. The craft foam is in three layers wrapped around the barrel and held with electric tape.

[NinjZ]

Guess I'll start and throw some of my stuff up here.

CPVC breach modded DT-3:


CPVC breach modded NF:


CPVC breach modded SplitFire:


CPVC turret modded AirTech2000:


CPVC breach modded Crossbow/SM1500 intagration and Crossbow

Edited by NinjZ, 19 October 2005 - 06:37 PM.

[AirApache]

Here's me holding my at2k+nf+rf20+crossbow losing gun.

Funny, but don't fuck around with our future pinned thread please.

[Ronster]

Dude, you must own in the nerf wars!

[J cobbers]

Dude, you must own in the nerf wars!

See now these are exactly the kind of responses I don't want in the thread. It is supposed to be for serious pictures, and constructive comments or questions. I appriciate the humor of AirApache's picture but that's not what this topic is for. Please don't dick around with the thread.

[ompa]

Yes, the x-bow barrel is crooked, I have since re-done pretty much the entire thing so now the barrels are straight. And no, the halo barrel in the picture is not attached to the gun body, it's just laying there. It's straight when it's attached.

I'm more than likely done buying nerf guns, unless I come across one of considerable potential. I've definately moved into the homemade arena (thanks Boltsniper), since I've found that a clip system really solves the ROF problems that some of the guns have, so I really don't find much of a need to buy the high ROF that seem to be popping up everywhere in toy stores. Hence, with my x-bow + clip or at2k + clip, I'm not sure if I'm going to come across something I'll like anytime soon (except a maxshot).

However, I'll still be working on homemades, so I'm far from dead on the site (still check it daily)

~ompa

Edited by ompa, 20 October 2005 - 05:20 PM.

[Ronster]

Does the clip on the s-n-i-p-e-r rifle work?
If so, how many darts will it hold?

Edited by Ronster, 20 October 2005 - 05:01 PM.

[ompa]

The rifle is not done yet, it needs a trigger and 2 cpvc elbows. The clip holds about 6 darts.

I just need to attached the expanded AT2k chamber and glue the tubing on, put the trigger on, glue the cpvc elbows in, and it's done.

Filter definately got me. Nice one Cx.

~ompa

Edited by ompa, 20 October 2005 - 05:24 PM.

[CustomSnake202]

Alright, I guess I'll dump my load off here. Sorry for some of the crappy pics, a year or two back I wasn't able to take a decent photograph for some reason.

[Sqiggs89]

I have modded many guns in my past but have painted only a few. Take a gander
The New style NF just has that gay Hump cut off. and CPVC Coupler modded the trigger was WAY old so it's got some Black Sharpie on it from when I was a newb
The Old Style NF is my second Paintjob. the first one was just black with blue fade But this is the first actual Paintjob. Pleas etry to comment on my First (2 Tone) Paintjob.






Take a gander at what I look at when I shoot some fools




I recently picked up some Metallic Gold and some Gloss Gray paint so expect some future projects by me!


EDIT: Painted my New Edition NF. Here she be.....It's a New edition NF with the Hump cut off. I also E-Taped the plunger tube. Did a Coupler Mod, and painted it with my New Gloss Gray.

Picage.



I have more pics but don't want to make the pages incredibly hard to load if you have a crap computer.

Edited by Sqiggs89, 24 October 2005 - 06:40 PM.

[joeyaglr444]

Splitfire Tactical Final

Splitfire Silencer detatched

How it all began




Hooah My mistake, I ve been meaning to adjust but some feedback would be appreciated.

Edited by joeyaglr444, 20 October 2005 - 08:28 PM.

[man with many guns]

Here's some of my mods:


Quad barreled at2k:



Custom painted firefly(not finished):



3B with 750 (old) integrated:



Joey:Your pics are to big. Sorry for not leaving you feed back but that has to be the best split fire i have ever seen. And where did you get the stock?

Edited by man_with_many_guns, 20 October 2005 - 08:55 PM.

[joeyaglr444]

Splitfire stock was custom make out of wood by me. Details:Splitfire Tactical
Very nice BBB whats that tube on the top?

Edited by joeyaglr444, 20 October 2005 - 09:48 PM.

[Uncle Hammer]

That would be the internals of a sm750.

[nerfisfun]

*CLick* *
*CLick*
the blue ones barrel isn't going to be mustard yellow in the end, I'm letting it dry right now.
The scopes:


zebra black n' white now:

Edited by nerfisfun, 22 October 2005 - 07:18 PM.

[Renegade]

*snip*

Your barrels look slightly crooked.

Here's a few of my modded guns.





The Rf20's clipmodded also.

Edited by Renegade, 22 October 2005 - 05:56 PM.

[nerfisfun]

Your barrels look slightly crooked.

It is, it has to be to fit in, I'm working on a scope (Mainly a 1 inch pvc glued on the barrel
here they are: finished, but not dry:
and red one:

Edited by nerfisfun, 22 October 2005 - 08:25 PM.

[man with many guns]

Joey, Hammer is right, thats the sm750, and thanks.

At2k with stock attatched:




At2k with stock not attatched:

Edited by man_with_many_guns, 22 October 2005 - 08:46 PM.

[Pico10]

CPVC breach modded Crossbow/SM1500 intagration and Crossbow

Nice integretion but the pump should be where the barrelis of the sm1500, and the barrel should come out the top hole where the original Xbow's barrel was.

[BloodMoon]

Nice integretion but the pump should be where the barrelis of the sm1500, and the barrel should come out the top hole where the original Xbow's barrel was.

Uhh, then where would the crossbow's barrel be??

Here's a pic of my LBB, though I already posted the pic in some other thread:

[NinjZ]

Nice integretion but the pump should be where the barrelis of the sm1500, and the barrel should come out the top hole where the original Xbow's barrel was.

1) The tubing isnt long enough to reach without getting in the way of the internals.
2) I like it that way. I had tried a few moc set ups before I settled on that set up. It works much easier for me.

[Peter]

Nice integretion but the pump should be where the barrelis of the sm1500, and the barrel should come out the top hole where the original Xbow's barrel was.

Uhh, then where would the crossbow's barrel be??

Here's a pic of my LBB, though I already posted the pic in some other thread:
<snipsnipfunfun>

[SirTofu]

Here's My little collection:

Edited by SirTofu, 23 October 2005 - 04:41 PM.

[Peter]

Do you get better ranges with the at2k's with longer barrels SirTofu?

[SirTofu]

I believe I do. I havent really tested it, though.