41 replies to this topic

[Uncle Hammer]

Your guns must suck to all who say the stock barrel sucks. Mine got around 80-90 without plugging the release valve.

[Talio]

Well, didn't read the COC all that closely did we?

I didn't think so.

Common god damn sense. Some of you make me want to set an economy car with a family of four inside on fire. Please, re-read the COC. I don't fucking mean skim it while you watch dragon ball Z and take your Ritilan (but you're a scientologist, so you probably aren't into street drugs) I mean read it to the point where you can recite it at gun point with a size 13 boot in your ass.

I think my point is clear.

Talio.

[sniperdude]

I must say, many of you claim your LBB stinks?.. Try doing a PVC couplermod I did it and my LBB gets like 80 without the overpressure release valve plugged Once that was done I brought it to my pool (well across the street from the pool) and was nailing people (not random people mind you). And than The life guards at the pool asked me to make them 3, than 2 kids,and some random person i've never met bought one



~loser~

[scientology]

yeah the stock barrel is pretty nice. You have to use stefans though to get the most power because you cant fit micros all the way in. Oh and on the red and grey lbb you'll have to hacksaw the tip of the barrel off to get the air restrictor out cause its glued on

Edited by scientology, 22 August 2005 - 03:27 PM.

[LastManAlive]

No, not really. Just use a knife to cut the grating and the "glued" on peice will remove with the knife too. Shot my friend with one and he bought it. Then his brother bought one. Then his brothers 3 friends bought one from me. I made around 80 bucks on this thing. Considering I sold it for 10 to my friend and for 20 to the rest. A CPVC coupler works good with a 10 inch barrel. And you might want to try puting some foam insulation around the barrel. And of course to the point where you can get the barrel in there. I was able to get a good 150 angled high.

[scientology]

I tried pulling it out with a plier and most of the grating I ripped out but it still didnt come out but I didnt want to risk breaking off the barrel so I just cut off a little bit off the tip of the barrel. mine was definately glued on though

Edited by scientology, 22 August 2005 - 10:42 PM.

[Osiris]

I want to try to cut along the line where the 2 parts are glued together with a saw. So i can get that gay glue off. I tried hair dryer I did it for 10-15 times i tried twice but failed I tried pulling both peices off as hard as I could immediatly after blow drying but they wouldn't move at all. I am kind of afraid of breaking the gun if I try sawing along the line but that is all I can think of trying. At least I can saw off half way and blow dry to try to pull ou the rest or I could use screw drivers to pry it off once I saw along the line a bit. Or do a combo of both would actually be best saw a bit, use screw driver to pry off, and use blow drier. I NEED to plug the release valve. This gun pretty much sucks if it is not pluged. Mine gets like 40ft maybe 50ft tops with the stock barrel shooting stefans.

Oh my god.... I opened the wrong thing... I opened the blue contaioner. I actually have to get the white plunger tube off of that blue thing damn it... FUCK!!!. Im going to try to put some plumbers goop and glue the two pieces back together with the screws back.

Maybe I can use that to my advantage I can try to take the plunger tube off from the inside and the outside using screw drivers and maybe the hair drier.

Edited by Osiris, 24 August 2005 - 10:43 AM.

[baghead]

You Almost Gotta use a Heat Gun, I've done it twice, but I've also Killed one by doing this. It works WAAAAy easier on NEW LBBS. It takes some pratice to use a heat gun too, I STONGLY suggest you pratice on a loose AT2K Turret first.

-Bags

[Osiris]

What do you mean by heat gun? A hot glue gun? God damn it this mod is soo fricken hard... Maybe I should remove that grey part at the end of the gun instead of removing he whole plunger tube I don't know which is easier to do to get to the pump plunger. 107.2 ft with this gun without the release valve pluged is bull shit. Just putting a brass barrel won't add on all that range. It shoots as far as an NF with the stock barrel and no modifications.

Edited by Osiris, 24 August 2005 - 10:57 AM.

[cxwq]

Just cut the plunger tube right in front of the rear cap... I'm sure someone already suggested that. The rear end of the plunger tube never holds any pressure so you don't even have to work that hard at gooping it up perfectly.

As for the performance without pump plug, the break pressure of the overpressure release valve is one of the most variable items with manufacturing differences. I've seen SFs with almost double the typical stock pressure capacity. There's no reason LBBs would be immune to this sort of variance.

A heat gun is not a hot glue gun, Google it.

[Osiris]

Thats a good idea I was going to do that, but since I already opened the blue air tank I will do this:
1. Take out that round rubber air restrictor.
2. Drill a hole the size of a quarter where the air restrictor was.

This way I have access to the plunger and the pressure release valve. I can plug it from there. Once it is pluged I will glue the 2 parts of the air tank with epoxy or plumber's goop and then put another seal of plumber's goop on the outside. I also enlarged the hole near the trigger valve where the air is released Im hopnig it can release the air in the tank faster out of the gun when the trigger is pulled.

I would have done what you just explained, its the best way I agree, but unfortuntly I did something pretty stupid I opened the blue air tank without thinking and fucked things up. Yes, I know very stupid. At least there was one advantage to opening the tank I could take out that air restrictor and make a larger hole so that the gun would be able to pump fast (well I think). Its my first time modding an LBB Iv learned how to do it know so next time it shouldn't be soo hard for me. Finally I think that I havn't done anything wrong it should all work out fine in the end Ill be testing the LBB in 2 days Ill let the glue dry well once I am done with this mod.

Ahh I see so its not a hot glue gun ok thank you. I hear all these people saying they will heat the glue and get the pieces of and Im like HOW??? Now I know thank you.

Edited by Osiris, 24 August 2005 - 12:44 PM.

[ompa]

Don't do that. I'm serious. I did that- forgetting that the rubber pad was the check valve. You'll have to glue the tank back together and find another way to plug it- trust me, there's no way to with the step you're at now, I've tried.

~ompa

[Osiris]

What the FUCK??? Are you kidding me I... Already did that... No No No are you serious? Im going to cry if my LBB is broken So my gun is broken it can't be fixed? Oh my gun I feel like and idiot.

Edited by Osiris, 24 August 2005 - 01:33 PM.

[ompa]

I thought the same thing you did- I cut open the main tank, and ripped off the rubber pad. Then realized it was the check valve. If you ripped it out and drilled through the plastic mesh, unless you have some serious skills and can implant a donor check valve in your LBB, it's dead.

I didn't say anything before because I had no idea what you were doing until that last post.

~ompa

[scientology]

hmm Osiris that sucks if yours is broken. I dont really mess with the pumps on any of my guns so I wouldnt know how to help you.


Anyways one more thing for everyone with an lbb, make sure there are no leaks between the orange barrel thats glued onto the air tank. YOu should seal it, mine wasnt glued properly

Edited by scientology, 02 September 2005 - 08:42 PM.

[Forsaken angel24]

Good to know. I'll check mine post haste.

[CaMbLaM]

Illadar and I both have lbbs. I love mine I prefer the lbb to and X-bow but Illadar dose not. I find it was a crappie rof but done right it should be really good in all other areas. I carry a lbb and a NF into wars, or a max shot and NF. I moded mine with brass and I find it has less power than Illadars whitch was moded with PETG breached barrel.